Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Tinyhawk S help....

  • 14-01-2021 10:00pm
    #1
    Registered Users Posts: 328 ✭✭


    I recently bought an Emax Tinyhawk S.

    After a few flights it developed a problem.

    It arms but does not spin the props and the throttle won't work.
    All the other controls work, the props spin for pitch yaw and roll but its obviously very little use when its lying on the ground with no flight happening.

    I have plugged it into beta flight.
    All the props spin individually at the same rate and via betaflight I can get all props to spin simultaneously via the master throttle in betaflight.

    The controller shows the throttle signal in betaflight to be operating.


    So in summary the drone Arms (goggles state it arms), but props won't spin.
    All props can spin in beta flight.
    Throttle signal working from controller (beatafpv)

    The drone just doesn't get off the ground....it did before but its had a few crashes.

    Any ideas?

    I reset the software back to original just incase it was a software issue after a knock but no joy.
    Thats as far as my expertise go....

    Thanks....The Goat.


Advertisement