If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)

Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Tinyhawk S help....

skapegoat · 2021-01-14 21:00:04

I recently bought an Emax Tinyhawk S. After a few flights it developed a problem. It arms but does not spin the props and the throttle won't work. All the other controls work, the props spin for pitch yaw and roll but its obviously very little use when its lying on the ground with no flight happening. I have plugged it…

Options

14-01-2021 10:00pm

#1

skapegoat

Registered Users Posts: 328 ✭✭

Join Date: July 2008

Posts: 282

I recently bought an Emax Tinyhawk S.

After a few flights it developed a problem.

It arms but does not spin the props and the throttle won't work.
All the other controls work, the props spin for pitch yaw and roll but its obviously very little use when its lying on the ground with no flight happening.

I have plugged it into beta flight.
All the props spin individually at the same rate and via betaflight I can get all props to spin simultaneously via the master throttle in betaflight.

The controller shows the throttle signal in betaflight to be operating.

So in summary the drone Arms (goggles state it arms), but props won't spin.
All props can spin in beta flight.
Throttle signal working from controller (beatafpv)

The drone just doesn't get off the ground....it did before but its had a few crashes.

Any ideas?

I reset the software back to original just incase it was a software issue after a knock but no joy.
Thats as far as my expertise go....

Thanks....The Goat.

0