Live self-Builds - mod warning in post no. 1

stickybookmark · 08-04-2016 07:02PM

After months of no progress on site roof has started with block layers starting to build the gables

fclauson · 08-04-2016 07:58PM

stickybookmark wrote: »

After months of no progress on site roof has started with block layers starting to build the gables

what wall make up are you building too & what is the return detail on your windows - hard to see in the picture?

Curious Geroge · 13-04-2016 08:50PM

Any advice on a dabs pump.

http://e.syboxmini.dabpump.eu/phone/index.html

stickybookmark · 14-04-2016 03:50PM

fclauson wrote: »

what wall make up are you building too & what is the return detail on your windows - hard to see in the picture?

6 inch cavity with pumped beed insulation inside then insulated plasterboard on the inside of the external walls.
Don't know what ''return detail'' means re windows sorry?

fclauson · 14-04-2016 04:12PM

stickybookmark wrote: »

6 inch cavity with pumped beed insulation inside then insulated plasterboard on the inside of the external walls.
Don't know what ''return detail'' means re windows sorry?

Have you done a FRSI calc to show you will not get condensation behind the plasterboard !!

The return detail is about what detail will you use around the windows to reduce the thermal bridge

murphaph · 14-04-2016 10:17PM

We're well into our 1.5 storey over basement here in Germany. Plenty of the usual stress to report but it's coming along fast now. We're building a reinforced concrete waterproof cellar (groundwater at 2m depth) with a prefabricated timber frame house atop. Cellar and house from 2 different builders.

Ground floor screed went in over the UFH today.

kboc · 15-04-2016 10:42PM

The black strips?
Expansion joints?

murphaph wrote: »

We're well into our 1.5 storey over basement here in Germany. Plenty of the usual stress to report but it's coming along fast now. We're building a reinforced concrete waterproof cellar (groundwater at 2m depth) with a prefabricated timber frame house atop. Cellar and house from 2 different builders.

Ground floor screed went in over the UFH today.

murphaph · 16-04-2016 08:08PM

kboc wrote: »

The black strips?
Expansion joints?

Yeah expansion joints and also used around the hearth as there's no UFH under there due to the potential heavy weight of a stove. I'll just tile over those ones and respect the proper expansion joints in the tiling.

The floor got screeded on Thursday. Looks well today but I was busy outside taking advantage of the scaffolding while I can to paint the barge boards. They are pretty high at the apex due to our 45°pitch. The apex is over 30 feet off the ground so I won't be climbing up there with a ladder any time soon.

Will pull a final few cables tomorrow as the builder has scheduled Monday to board out the ground floor walls. The good thing about this crowd is they leave an installation void behind the external walls so you can still push cables horizontally along if you need to add a socket here or there.

Bullocks · 16-04-2016 08:58PM

murphaph wrote: »

Yeah expansion joints and also used around the hearth as there's no UFH under there due to the potential heavy weight of a stove. I'll just tile over those ones and respect the proper expansion joints in the tiling.

The floor got screeded on Thursday. Looks well today but I was busy outside taking advantage of the scaffolding while I can to paint the barge boards. They are pretty high at the apex due to our 45°pitch. The apex is over 30 feet off the ground so I won't be climbing up there with a ladder any time soon.

Will pull a final few cables tomorrow as the builder has scheduled Monday to board out the ground floor walls. The good thing about this crowd is they leave an installation void behind the external walls so you can still push cables horizontally along if you need to add a socket here or there.

Is the chimney slated , is that the usual out there ?
What finish is going on the outside?

murphaph · 16-04-2016 10:35PM

Bullocks wrote: »

Is the chimney slated , is that the usual out there ?
What finish is going on the outside?

Yeah slates cladding the chimney, standard enough here. It's a prefab double bore chimney. The stove draws it's fresh air down one of the bores. It saved us running a feed pipe through the cellar which is also living space. It was delivered to site in 2 sections and lifted in with the crane. The external 140mm insulation is yet to go on, then it'll just get plastered. The cellar will get a different colour, darker finish to complement the dark roof tiles.

stickybookmark · 16-04-2016 10:45PM

fclauson wrote: »

Have you done a FRSI calc to show you will not get condensation behind the plasterboard !!

The return detail is about what detail will you use around the windows to reduce the thermal bridge

This is the plan. General labourer will install insulation before window install. Window vendor will pin them in place and getting an air tightness guy on board after that.

sydthebeat · 18-04-2016 07:58AM

stickybookmark wrote: »

This is the plan. General labourer will install insulation before window install. Window vendor will pin them in place and getting an air tightness guy on board after that.

jesus!

has your window installer seen that???

893bet · 18-04-2016 09:02AM

Nice glass hearth! It's proped up here on some pieces of timber as not leaving it in place till stove being installed incase some one drops something on it! Will look better on floor!

stickybookmark · 18-04-2016 11:04AM

sydthebeat wrote: »

jesus!

has your window installer seen that???

Actually no.......I'll send it onto them. Still adjusting to there being no builder now and us having to fill in all those gaps.

murphaph · 18-04-2016 12:22PM

Screed down on ground floor. Cellar guy is there today chasing the walls for the electrics and boring a load of holes for the various services into the utility room and on to the guest shower room.

murphaph · 19-04-2016 02:59PM

Few pics from the utility room in the cellar..

rampantbunny · 21-04-2016 10:07AM

murphaph wrote: »

Few pics from the utility room in the cellar..

Looks like you have a major mouse problem there...and they might have worked out how to use a core drill. Scary.

893bet · 21-04-2016 10:21AM

Blue is colour!

893bet · 21-04-2016 10:22AM

Green is also the colour (this is the master bedroom, not the bathroom by the way).

rampantbunny · 21-04-2016 10:45AM

893bet wrote: »

Blue is colour!

...watch out for the mouses. They've removed some of your skirting in preparation for coring some holes in your wall. Probably still got the core drill on hire from the murphaph job.

Sorry, slow morning.

stickybookmark · 23-04-2016 08:05PM

sydthebeat wrote: »

jesus!

has your window installer seen that???

Apparently it doesn't affect the window vendor. We will just make sure the insulation is in as per these drawings before he pins the windows in place, then the air tightness guy finishes off with the tape etc.

mel o · 24-04-2016 12:22AM

893bet wrote: »

Blue is colour!

Lovely floor, what is it?

893bet · 24-04-2016 12:48AM

mel o wrote: »

Lovely floor, what is it?

It's semi solid oak. I got it in Heiton Buckleys. I think the price is around 33 per sq yard. Often on sale at around 28-30 per.&

mel o · 24-04-2016 08:10PM

That's a great price, I think I'll investigate.

mel o · 24-04-2016 08:10PM

That's a great price, I think I'll investigate.

Wegian · 25-04-2016 11:14PM

Progressing well..

Copy%20of%2020160310_151630_zpse6l8k8rz.jpg

FiOT · 26-04-2016 09:45AM

Hopefully I can finally give back to the site that's taught me so much! Foundations being poured today, very exciting!

delfagio · 26-04-2016 10:58AM

FiOT wrote:

Hopefully I can finally give back to the site that's taught me so much! Foundations being poured today, very exciting!

Best of luck with it, onwards and upwards from here...

chillit · 26-04-2016 12:33PM

FiOT wrote: »

Hopefully I can finally give back to the site that's taught me so much! Foundations being poured today, very exciting!

best of luck with the build

would be great if you can post photo updates as you progress.

FiOT · 26-04-2016 01:27PM

chillit wrote: »

best of luck with the build

would be great if you can post photo updates as you progress.

Will do, I've found everyone else's posts so useful so I'll try get as many updates as I can up. Might not always be the most informative but I'll try my best.

Live self-Builds - mod warning in post no. 1

Comments

Welcome!