Edision Optimuss OS 3 Plus

AtomsForPeace wrote: »

Cheers for that.. Tried the skin there and 'tis pretty sweet. A big improvement than the default one from freetv.

This whole thread has been pretty useful...
Good job boardies!

No problem,

For anyone who hasn't tried it see some pics of it:

g0g wrote: »

Ok so I managed to get OpenVix image loaded up on my box after a complete reset of the thing. Stupidly didn't back up any channel lists. I wouldn't mind re-organising them, but before I start I can't actually see any Soarview channels yet! Any ideas? I followed the guide here but it produced no matches. I have most of the channels in my station list, but they've been found via the dish and not the Saorview tuner as far as I can tell. NB Saorview was working perfectly up to now!

On the settings I've tried by channel 54 (I'm in Bray and fairly certain I should be going for Three Rock or Kippure.

Other settings:
Yes I've selected tuner C
User defined transponder
System I've tried T and T2 - any difference between these?
Bandwidth 8MHz
Most of the rest are Auto then three no's at the end of the manual tune list.

Run a auto scan of dvb-t and it should pick them up.

g0g wrote: »

Nice on thanks, that did the job!

Now if I could just format the hard drive I'd be laughing! Keeps giving an error when I try to re-initialise it or even run a file check on it. Any thoughts?

If the format option in the image doesn't work you'll need to take it out and format it on your PC with a sata to USB cable or if you have an enclosure. I use paragon partition manager.

FrostyJim wrote: »

If the format option in the image doesn't work you'll need to take it out and format it on your PC with a sata to USB cable or if you have an enclosure. I use paragon partition manager.

Thanks, will give that a go. Just to be clear, I don't need to partition it any special way? Your reference to Paragon is just the tool you use from your box?

Also, are all four ITV's and BBC's available in HD on FTA? I find them all but don't get picture on all

g0g wrote: »

Thanks, will give that a go. Just to be clear, I don't need to partition it any special way? Your reference to Paragon is just the tool you use from your box?

Also, are all four ITV's and BBC's available in HD on FTA? I find them all but don't get picture on all

Paragon partition manager is for windows. As said below all the BBC's are fta in HD, HD itv2-4 only available on sky.

Partymack wrote: »

OPEN ATV 5.2 released - Beta Image

Anyone tried the latest OATV 5.2 image (released 13.02) yet? Beta version available for download here now:

http://images.mynonpublic.com/openatv/5.2/

Thought I'd never move away from OATV but Been using OpenVix for last month and finding it a lot more stable.... I'm Tempted though...

Have gone with it so will let you know how I get on.

So far so good.:(

Partymack wrote: »

Interesting.... Keep me posted!

Well i just flashed a fresh image and did a clean install scanning all channels etc. Didn't restore any of my previous settings and the only additional plugin I downloaded was the crossepg. Picked up the wifi network no problems using the dongle as the driver is part of the standard image which isn't always the case with other images.

Downloaded new updates this morning before heading to work so will see how it behaves.

First impressions are that it seems quicker to zap through the channels and, don't know if it is just me, the HD picture seems better/brighter.

I do notice (and this was always the case with me since openatv 4.2) that if you continually flick between channels that it will eventually hang.

Partymack wrote: »

No problem,

For anyone who hasn't tried it see some pics of it:

Can you tell us how to load this please? Not to familiar with FTP

jayo26 wrote: »

Save the file to a usb stick and insert it into front of box it should go to install it or does the edision not work that way??

Will give that a try

Actually just read the instructions

Instructions.

1. Download latest IPK file

2. Copy IPK file to /var/volatile/tmp

3. Install on OpenAtv



How do I copy the file over?

Kalyke wrote: »

Will give that a try

Actually just read the instructions

Instructions.

1. Download latest IPK file

2. Copy IPK file to /var/volatile/tmp

3. Install on OpenAtv



How do I copy the file over?

Not if front of box so doing this from memory.

If you have the ipk downloaded onto a usb then plug this into the usb port. If you hit the blue button on the remote you should see an option on the left for plugins, select this and then there should be an option on the right to install extension or could be install ipk. If you select this then you should be able to select the usb and then the ipk and install.

Anyone successfully put IPTV streams in channel bouquets yet?

I've half cracked it but struggling to understand how lamedb file interacts with user bouquets.

dherbage wrote: »

Hi Guys,
Can anyone tell me from their own personal experiences what is the best image to use with the Edision Optimuss OS3 Plus box, I am currently using an old HDFreaks image and starting experiencing difficulties yesterday so I tried to do an online update but kept failing so now I am gonna try a manual update but then I have to reinstall epg and everything I already have set up, is there a better image out there and is there an easier way to update the image?

many thanks,

dellboy.

I found HDF to be stable on these boxes although I am experimenting with different images, Openvix gets good mentions on here. I would try a fresh install of HDF first.

Under the same settings for the software update there should be an option to save settings, do this first. I would then download the latest HDF image to a PC/Laptop and extract the zipped file to a USB stick so that you have a file on the root of the USB called 'update'.

Turn the box off using the switch at the back, remove any USB's you have attached to the rear. Plug the USB with the update folder into the front USB port and turn on the box. There should be a message appear on the TV to press the - channel button (press the one on the front of the box and not the remote) this will then upgrade. Once done you will be asked to remove the usb and turn the box off and on.

The box will reboot and should go through the setup process again and along the way it should ask to restore settings.

Hopefully you should get back up and running with the same setup as before.

Thanks THE ALM,
I followed your post advice and it all worked and was updated.
Where can I download an OpenVix image?
Regards, dellboy

Thanks PartyMack, I'll give it a go