Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

Kodi Android TV Streaming Box [Livingsocial + wetek group]

1…6465676970…75

Comments

  • #1982
    wiz569
    Registered Users, Registered Users 2 Posts: 1,729 ✭✭✭wiz569


    Glen_Quagmire wrote: »
    Would it be a better move to try OpenPLI as this is an official Wetek image?

    http://wetekforums.com/v/index.php?p=/discussion/26882/official-openpli-topic-wetek#latest

    So is OpenATV and PBEnigma m8,try it or PBEnigma and see if it sorts it


  • #1983
    tommycahir
    Registered Users, Registered Users 2 Posts: 2,592 ✭✭✭tommycahir


    Glen_Quagmire wrote: »
    Would it be a better move to try OpenPLI as this is an official Wetek image?

    http://wetekforums.com/v/index.php?p=/discussion/26882/official-openpli-topic-wetek#latest

    If you read on to the last page they have not yet got the openelec remote working correctly with the openpli image.
    It is likely to be the most promising and stable image overtime as it is offically endorsed by the wetek developers themselves and they are liasing directly with openpli team on all bugs


  • #1984
    captain_boycott
    Registered Users, Registered Users 2 Posts: 540 ✭✭✭captain_boycott


    Glen_Quagmire wrote: »
    Would it be a better move to try OpenPLI as this is an official Wetek image?

    http://wetekforums.com/v/index.php?p=/discussion/26882/official-openpli-topic-wetek#latest



    Just out of curiosity, what do you get with Openpli/Openatv/pbenigma and such over a stock Wetek running Kodi/TVheadend? Is it just a better UI for TV, or more features/etc.?


  • #1985
    tommycahir
    Registered Users, Registered Users 2 Posts: 2,592 ✭✭✭tommycahir


    wiz569 wrote: »
    So is OpenATV and PBEnigma m8,try it or PBEnigma and see if it sorts it

    Are you sure that the other 2 images are actually being supported like openpli for wetek? I was of the impression from reading annoucements that openpli was only one getting offical wetek developer support.

    I am not 100% sure on this topic so will bow to anybody elses knowledge on it..


  • #1986
    wiz569
    Registered Users, Registered Users 2 Posts: 1,729 ✭✭✭wiz569


    tommycahir wrote: »
    Are you sure that the other 2 images are actually being supported like openpli for wetek? I was of the impression from reading annoucements that openpli was only one getting offical wetek developer support.

    I am not 100% sure on this topic so will bow to anybody elses knowledge on it..

    Well they are developed and posted/hosted on the relevant Official forums,that's all I'm going by


  • Advertisement
  • #1987
    Glen_Quagmire
    Registered Users, Registered Users 2 Posts: 1,137 ✭✭✭Glen_Quagmire


    wiz569 wrote: »
    Try a new image,I'm using OpenATV dated the 29/01/2016 and not getting audio sync,its either that or I'm blind lol

    Just about to try that version of openatv and downloaded it to discover its the one I am actually using:(

    Head is destroyed again...:confused:


  • #1988
    wiz569
    Registered Users, Registered Users 2 Posts: 1,729 ✭✭✭wiz569


    Glen_Quagmire wrote: »
    Just about to try that version of openatv and downloaded it to discover its the one I am actually using:(

    Head is destroyed again...:confused:

    Maybe try PBEnigma?


  • #1989
    Glen_Quagmire
    Registered Users, Registered Users 2 Posts: 1,137 ✭✭✭Glen_Quagmire


    trying to at the moment but cant get the coloured buttons on the remote to work. I have changed the RCU to Wetek Openelec already...??


  • #1990
    GY A1
    Registered Users, Registered Users 2 Posts: 2,255 ✭✭✭GY A1


    its been said before but these images are a work in progress and there are issues with the updates,
    some updates or new images are worse than previous with issues same as ur self with sound ect,
    as said previously you may need to revert back to an older working image release,
    im using one from december
    and at least its running smooth


  • #1991
    GY A1
    Registered Users, Registered Users 2 Posts: 2,255 ✭✭✭GY A1


    its been said before but these images are a work in progress and there are issues with the updates,
    some updates or new images are worse than previous with issues same as ur self with sound ect,
    as said previously you may need to revert back to an older working image release,
    im using one from december
    and at least its running smooth


  • Advertisement
  • #1992
    wiz569
    Registered Users, Registered Users 2 Posts: 1,729 ✭✭✭wiz569


    Glen_Quagmire wrote: »
    trying to at the moment but cant get the coloured buttons on the remote to work. I have changed the RCU to Wetek Openelec already...??

    Also change keymap


  • #1993
    Glen_Quagmire
    Registered Users, Registered Users 2 Posts: 1,137 ✭✭✭Glen_Quagmire


    wiz569 wrote: »
    Also change keymap


    To what? I only see options for different languages and dreambox...

    Trying an older version now, hopefully this works


  • #1994
    wiz569
    Registered Users, Registered Users 2 Posts: 1,729 ✭✭✭wiz569


    Glen_Quagmire wrote: »
    To what? I only see options for different languages and dreambox...

    Trying an older version now, hopefully this works

    Should be a different section for Keymap m8 I'm sure,I think your in input or keyboard section


  • #1995
    RossieMan
    Registered Users, Registered Users 2 Posts: 6,766 ✭✭✭RossieMan


    There is, its keyboard. A simple search will find you most answers.


  • #1996
    Glen_Quagmire
    Registered Users, Registered Users 2 Posts: 1,137 ✭✭✭Glen_Quagmire


    Anyone know how to active oscam in pbnigma?

    Ive downloaded the one I want but I cannot find the softcam manager anywhere?

    Cant find the answer on Google either.


  • #1997
    RossieMan
    Registered Users, Registered Users 2 Posts: 6,766 ✭✭✭RossieMan


    go to plugins, powerboard manager i think its called.

    My PBenigma is playing up after an update and cant for the life of me get it to reboot, stuck on the loading screen.

    Will probably use OPENPLI next, will definitely be trying android when i get a chance.


  • #1998
    RossieMan
    Registered Users, Registered Users 2 Posts: 6,766 ✭✭✭RossieMan


    go to plugins, powerboard manager i think its called.

    My PBenigma is playing up after an update and cant for the life of me get it to reboot, stuck on the loading screen.

    Will probably use OPENPLI next, will definitely be trying android when i get a chance.


  • #1999
    Glen_Quagmire
    Registered Users, Registered Users 2 Posts: 1,137 ✭✭✭Glen_Quagmire


    Pbnigma seems worse than openatv. Some of yne channels that were working perfectly on openatv were having audio sync issues on pbnigma.

    I installed an old version of pbnigma from November so don't know if that's what caused it.

    I'm new to all this so no other box to compare to but it seems the wetek is hard to get right.

    I've been reading on the wetek forum that wetek didn't design the architecture to work with enigma2 but are working in the background to try make enigma2 work so this could be why people are having such issues.

    I could be wrong though...


  • #2000
    crabbypaddy
    Closed Accounts Posts: 1,040 ✭✭✭crabbypaddy


    Glen_Quagmire wrote: »
    Pbnigma seems worse than openatv. Some of yne channels that were working perfectly on openatv were having audio sync issues on pbnigma.

    I installed an old version of pbnigma from November so don't know if that's what caused it.

    I'm new to all this so no other box to compare to but it seems the wetek is hard to get right.

    I've been reading on the wetek forum that wetek didn't design the software architecture to work with enigma2 but are working in the background to try make enigma2 work so this could be why people are having such issues.

    I could be wrong though...

    The fact that others here aren't having issues though it could be that your tv is doing some odd refresh rate or hdmi negotiation has gone haywire. Worth trying to plug it into another tv or computer monitor. I'm sceptical on the sd card theory but it might be worth doing a speed check on your class 10 card there are tons of fakes around.


  • #2001
    Glen_Quagmire
    Registered Users, Registered Users 2 Posts: 1,137 ✭✭✭Glen_Quagmire


    crabbypaddy wrote:
    The fact that others here aren't having issues though it could be that your tv is doing some odd refresh rate or hdmi negotiation has gone haywire. Worth trying to plug it into another tv or computer monitor. I'm sceptical on the cd card theory but it might be worth doing a speed check on your class 10 card there are tons of fakes around.


    You could well be right but the problem is there are so many different variables that it's hard to know what to try next. The hours are flying by trying different things and reading non stop on the net


  • Advertisement
  • #2002
    GY A1
    Registered Users, Registered Users 2 Posts: 2,255 ✭✭✭GY A1


    Ya some of the updates are very bad
    RossieMan wrote: »
    go to plugins, powerboard manager i think its called.

    My PBenigma is playing up after an update and cant for the life of me get it to reboot, stuck on the loading screen.

    Will probably use OPENPLI next, will definitely be trying android when i get a chance.


  • #2003
    GY A1
    Registered Users, Registered Users 2 Posts: 2,255 ✭✭✭GY A1


    For pbnigma 1/12/15 was good or there is a stable alt version think it's 16/1/16
    Told u earlier enigma2 is still being worked on
    That's why they saying to use it on an sd card and not bother putting on nand til it's stable !

    Glen_Quagmire wrote: »
    Pbnigma seems worse than openatv. Some of yne channels that were working perfectly on openatv were having audio sync issues on pbnigma.

    I installed an old version of pbnigma from November so don't know if that's what caused it.

    I'm new to all this so no other box to compare to but it seems the wetek is hard to get right.

    I've been reading on the wetek forum that wetek didn't design the architecture to work with enigma2 but are working in the background to try make enigma2 work so this could be why people are having such issues.

    I could be wrong though...


  • #2004
    Etnies
    Registered Users, Registered Users 2 Posts: 1,151 ✭✭✭Etnies


    No one got coloured keys working on Enigma image with normal remote? Ive ordered enigma2 remote but am impatient cause i cant install plugins :mad:


    Edit : just found an option to change remote settings but it crashed the box when I changed will have to reflash me thinks


  • #2005
    [Deleted User]
    Posts: 6,045 ✭✭✭ [Deleted User]


    No offense lads, but seeing as this is the BA for the boxes, should this discussion not be taken to the tips 'n tricks thread? It's a nightmare waiting for updates on the group order and getting notifications of new posts from people who already have a box.


  • #2006
    davidom2513
    Registered Users, Registered Users 2 Posts: 478 ✭✭davidom2513


    Is this the correct connection for dvb-t / dvb-c? (See image attached)

    http://s15.postimg.org/8nls67fgb/IMG_20160203_181856_1454523650235.jpg

    Or did I get the wrong box?

    I'm just not sure since its different to my cable connection I'm trying to hook up to it.

    Or do I need an adapter? This is first cable box I've bought. I usually deal with dvbs tuners


  • #2007
    GY A1
    Registered Users, Registered Users 2 Posts: 2,255 ✭✭✭GY A1


    Deleted User wrote: »
    No offense lads, but seeing as this is the BA for the boxes, should this discussion not be taken to the tips 'n tricks thread? It's a nightmare waiting for updates on the group order and getting notifications of new posts from people who already have a box.

    some people asking the same questions in 2-3 threads including here and android also lol :rolleyes:


  • #2008
    alanhiggyno1
    Registered Users, Registered Users 2 Posts: 1,499 ✭✭✭alanhiggyno1


    [Deleted User] wrote: »
    No offense lads, but seeing as this is the BA for the boxes, should this discussion not be taken to the tips 'n tricks thread? It's a nightmare waiting for updates on the group order and getting notifications of new posts from people who already have a box.

    How is the group order going aquos


  • #2009
    Aquos76
    Moderators, Regional South East Moderators Posts: 9,207 Mod ✭✭✭✭Aquos76


    alanhiggyno1 wrote: »
    How is the group order going aquos

    You must be telepathic, I'm in the middle of sending out email updates since 8pm, have about 25 left to send, they'll be sent in next hour or so.


  • #2010
    eamonnq
    Registered Users, Registered Users 2 Posts: 4,014 ✭✭✭eamonnq


    eamonnq wrote: »
    Thanks Aquos for doing this, got mine and just need time to start playing around with it now.


    I think any of the 'help' questions would be better asked on the other thread.

    http://www.boards.ie/vbulletin/showthread.php?t=2057531921

    or people could have a read over it and see if their questions have already been answered there.
    Deleted User wrote: »
    No offense lads, but seeing as this is the BA for the boxes, should this discussion not be taken to the tips 'n tricks thread? It's a nightmare waiting for updates on the group order and getting notifications of new posts from people who already have a box.

    They just won't listen!! The worst part of it is if you come across something that might be helpful, you have to search through 2 or 3 threads to find it!!:D


  • Advertisement
  • #2011
    Aquos76
    Moderators, Regional South East Moderators Posts: 9,207 Mod ✭✭✭✭Aquos76


    Right so, everyone should have had an email from me now asking you to confirm that the details I have for you are correct, All going well these will be with me on Friday morning and with the help of my three kids:D, we'll have them packaged up and sent back out on Friday afternoon, so hopefully ye will start to receive them then by Saturday afternoon.

    I will then be asking the mods to maybe close this thread as its just getting way to messy as people have already said. If someone else wants to do a group buy at another time, then I suggest a new thread should be opened.

    The lads on here went to the bother of setting up a dedicated thread for these wetek's that's really where all the questions should be asked to be honest.


This discussion has been closed.
Advertisement