Aritech CS350

golf.mk5 · 29-08-2015 04:49PM #1

Hi All,
Just looking for a bit of advice here. A relative living in Kildare has the above alarm fitted but it has been powered down for about 7 years as the house was rented. I understand that ideally the panel should be upgraded but at the moment they would just like a working alarm if possible. The panel is engineer locked and the original installer doesnt seem to be contactable. Is there any way around this?
Thanks,
Rob

degsie · 29-08-2015 06:03PM

Apparently you have to replace/reflash the EAROM on the mainboard.

golf.mk5 · 29-08-2015 06:20PM

Great thanks ill try and see if that can be done as the engineers that we have contacted so far seem to only want to replace the panel. Thanks again!

golf.mk5 · 29-08-2015 06:23PM

Great thanks ill try and see if that can be done as the engineers that we have contacted so far seem to only want to replace the panel. Thanks again!

KoolKid · 30-08-2015 12:18AM

Have you tried the standard default method?

golf.mk5 · 05-09-2015 02:30PM

KoolKid wrote: »

Have you tried the standard default method?

Sorry for the late reply! Yeah i have as per the other CS350 threads on here. Thanks though.

golf.mk5 · 05-09-2015 02:30PM

KoolKid wrote: »

Have you tried the standard default method?

Sorry for the late reply! Yeah i have as per the other CS350 threads on here. Thanks though.

KoolKid · 05-09-2015 06:53PM

A good engineer would be able to reset that panel for you.

Aritech CS350

Comments