Verified alarm from a single sensor

dloob · 25-08-2015 12:29PM #1

I've had a look at the Garda requirements around verified alarms for monitored alarms and from my reading of it a secondary activation is required from a different sensor.
Say an inertia first and then a pir.
But I've had an installer tell me that someone hitting a window and activating the same inertia twice would be enough to verify the alarm.
Is that correct?

KoolKid · 25-08-2015 03:10PM

No it wouldn't.
Sure a faulty device could be activating every few minutes. The whole idea of a verified alarm was to prevent calls due to false alarms by something faulty.
You can, however, have an inertia sensor on one zone and the contact on another. If both of them activate that would be a confirmed alarm.

dloob · 25-08-2015 04:38PM

KoolKid wrote: »

No it wouldn't.
Sure a faulty device could be activating every few minutes. The whole idea of a verified alarm was to prevent calls due to false alarms by something faulty.
You can, however, have an inertia sensor on one zone and the contact on another. If both of them activate that would be a confirmed alarm.

Yes I can see how inertia and then contact would make sense to verify.
But they were saying shock only which seemed pretty fishy to me and going by the model number in their quote they are supplying shock only sensors.

KoolKid · 25-08-2015 05:00PM

Sounds to me they are trying to sell you what they want, not what you need.
There's a lot of that in this business, unfortunately.

Verified alarm from a single sensor

Comments