Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

Big bags of fert with one tractor ?

  • 19-04-2015 03:52PM
    #1
    Registered Users, Registered Users 2 Posts: 495 ✭✭


    Vl1uYial.png?1

    This is what I do with big bags of fert. What do other people do when have only one tractor? This works but is a bit slow, have to cut on side and sort of pull the bag forward. Thinking of some sort of grid to put bags on that could back spinner under it...




    modnote- I edited in your image pms7 as your name was on the Flickr a/c.


«13

Comments

  • Registered Users, Registered Users 2 Posts: 4,420 ✭✭✭orm0nd


    too dangerous looking for my liking, 1 slip and bang your head off the spreader


  • Registered Users, Registered Users 2 Posts: 374 ✭✭Aska


    I have heard of guys using a hook that's attached to a overhanging girder that you back in under, but haven't seen it myself.

    Be interested to know myself, I only have an old Vicon spreader that holds 2 big bags and a dodgy Massey that really doesn't steer so well, so it could take me the bones of 5 minutes to line a back over the spinner even if the bag is beside it.


  • Registered Users, Registered Users 2 Posts: 5,678 ✭✭✭Grueller


    I have an out farm about 6miles away. I got an old steel street light pole from an uncle in the ESB. I welded an arm onto it at a height which allows me to hang the bag off the arm usingvthe front loader, then spin around and back the spinner under the bag. Works well for me but you need a front loader.

    a neighbour has a gantry in the yard set up with a winch on it. He leaves the fert within reach of the winch when its delivered and rises it using the winch as he has no front loader. He only spreads about 4 tonne a year so I reckon small bags would be far handier for him in his case.


  • Banned (with Prison Access) Posts: 875 ✭✭✭f140


    my post is pointless to the op but I have a digger (terex 860) to load the bags but this year I bought all the urea in small bags. I noticed while I was fecking around getting the digger out of the shed I had the small bags loaded. going to carry on with small bags for another 10 tonne or because I actually want to stock up in the bags (use them for rubbish etc).


  • Registered Users, Registered Users 2 Posts: 5,678 ✭✭✭Grueller


    f140 wrote: »
    my post is pointless to the op but I have a digger (terex 860) to load the bags but this year I bought all the urea in small bags. I noticed while I was fecking around getting the digger out of the shed I had the small bags loaded. going to carry on with small bags for another 10 tonne or because I actually want to stock up in the bags (use them for rubbish etc).

    Small bags are handy alright but take a fools advice and have the pallets up on a bale trailer or something similar when loading the spinner. Lifting them from the ground up to the edge of the spinner is a real recipe for back injury. There is a good reason that nearly all other bags are gone to 20-25kgs.


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 12,172 ✭✭✭✭mahoney_j


    That's my way lads


  • Registered Users, Registered Users 2 Posts: 5,678 ✭✭✭Grueller


    mahoney_j wrote: »
    That's my way lads

    Very similar to my setup on the outfarm.


  • Registered Users, Registered Users 2 Posts: 24,883 ✭✭✭✭Reggie.


    Grueller wrote: »
    Small bags are handy alright but take a fools advice and have the pallets up on a bale trailer or something similar when loading the spinner. Lifting them from the ground up to the edge of the spinner is a real recipe for back injury. There is a good reason that nearly all other bags are gone to 20-25kgs.

    Best advice right there. Chest height is a must and takes at least 70% off the effort required


  • Registered Users, Registered Users 2 Posts: 848 ✭✭✭dohc turbo2


    Only made one for a farmer a few weeks ago , big rsj and one a short one on top with a 4 inch pipe welded to it, there hanging 2 bags off it and working well , when his lease is up it will be moved on


  • Registered Users, Registered Users 2 Posts: 7,743 ✭✭✭ganmo


    f140 wrote: »
    my post is pointless to the op but I have a digger (terex 860) to load the bags but this year I bought all the urea in small bags. I noticed while I was fecking around getting the digger out of the shed I had the small bags loaded. going to carry on with small bags for another 10 tonne or because I actually want to stock up in the bags (use them for rubbish etc).

    If ya want small bags there's plenty here!


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 1,832 ✭✭✭yellow50HX


    Well we use the digger to lift the bags and it's a god send, if both of us are around one of use will bring the bags up the field while the other is spreading really shortens the job.

    Used to use small bags and do the odd time but not great for the back. Used to leave them in the trailer which made them easier to tip into the spinner.

    Cousin bought one of these last year and is very happy with it. He loads one into the spinner the brings another up the field with him and leaves it in the field and loads that with out having to go back to the yard. It's the job if you don't have a loader.
    http://www.cashels.net/wp-content/uploads/2012/07/Power-Crane.pdf

    Also I remember a guy made a frame on wheels for loading the spinner


  • Registered Users, Registered Users 2 Posts: 24,883 ✭✭✭✭Reggie.


    yellow50HX wrote: »
    Well we use the digger to lift the bags and it's a god send, if both of us are around one of use will bring the bags up the field while the other is spreading really shortens the job.

    Used to use small bags and do the odd time but not great for the back. Used to leave them in the trailer which made them easier to tip into the spinner.

    Cousin bought one of these last year and is very happy with it. He loads one into the spinner the brings another up the field with him and leaves it in the field and loads that with out having to go back to the yard. It's the job if you don't have a loader.
    http://www.cashels.net/wp-content/uploads/2012/07/Power-Crane.pdf

    Also I remember a guy made a frame on wheels for loading the spinner

    I see a good few big fert spreaders come with them nowadays


  • Registered Users, Registered Users 2 Posts: 446 ✭✭poor farmer




  • Registered Users, Registered Users 2 Posts: 24,883 ✭✭✭✭Reggie.



    Be grand but you need a loader to lift the bags still but at least it's mobile


  • Registered Users, Registered Users 2 Posts: 7,743 ✭✭✭ganmo




  • Registered Users, Registered Users 2 Posts: 24,883 ✭✭✭✭Reggie.


    ganmo wrote: »
    at €1 thats a steal ;)

    Wonder would he do a group discount


  • Registered Users, Registered Users 2 Posts: 1,079 ✭✭✭grazeaway



    That's a good idea was going to build sone like that a few years ago, had an old hopper with a mesh bottom.


  • Registered Users, Registered Users 2 Posts: 24,883 ✭✭✭✭Reggie.


    grazeaway wrote: »
    That's a good idea was going to build sone like that a few years ago, had an old hopper with a mesh bottom.

    Wouldn't be hard but just make sure you had/have plenty of reinforcement


  • Registered Users, Registered Users 2 Posts: 4,004 ✭✭✭Green farmer


    [QUOTE=Grueller;

    Lifting them from the ground up to the edge of the spinner is a real recipe for back injury. There is a good reason that nearly all other bags are gone to 20-25kgs.[/QUOTE]


    +1

    Cannt understand why don't come in 25kg bags.


  • Registered Users, Registered Users 2 Posts: 285 ✭✭raypallas


    pms7 wrote:
    This is what I do with big bags of fert. What do other people do when have only one tractor? This works but is a bit slow, have to cut on side and sort of pull the bag forward. Thinking of some sort of grid to put bags on that could back spinner under it...


    Just a suggestion poster, why not put two railings (something like 1 1/4 pipe) across infront of the bags incase they fall down. If you put the first at a height of say 18 inches and the second at 30 inches it would stop the bags from falling. If you kept the pipes out 6 inches from the shelf, it would allow ya to cut the front of the bag and part of the bottom of the bag making it much easier to empty it.

    Sorry about long post!!!


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 25 williemakeit


    Anyone use a chain hoist to lift big bags. I was thinking about having a1 ton chain hoist onto roof of shed.... any thoughts


  • Registered Users, Registered Users 2 Posts: 24,883 ✭✭✭✭Reggie.


    Anyone use a chain hoist to lift big bags. I was thinking about having a1 ton chain hoist onto roof of shed.... any thoughts

    Make sure the roof beam can take that kind of weight. Plus would you insurance cover it?


  • Registered Users, Registered Users 2 Posts: 752 ✭✭✭micraX


    No one else have a forklift?


  • Registered Users, Registered Users 2 Posts: 752 ✭✭✭micraX


    No one else have a forklift?


  • Registered Users, Registered Users 2 Posts: 24,883 ✭✭✭✭Reggie.


    micraX wrote: »
    No one else have a forklift?

    Most farmyards I know wouldn't


  • Registered Users, Registered Users 2 Posts: 3,194 ✭✭✭foxy farmer


    Anyone use a chain hoist to lift big bags. I was thinking about having a1 ton chain hoist onto roof of shed.... any thoughts

    Will work if roof structure is up to it but it's damn slow. Use one here the odd time with big bags of ration to keep out of reach of vermin. Same speed up and down. PITH!!


  • Registered Users, Registered Users 2 Posts: 4,927 ✭✭✭mf240


    If you could get a reliable contractor with a bulk spreader for the big spreads and just pick up a couple of bags in the spreader at the co op for the small bits .??


  • Registered Users, Registered Users 2 Posts: 1,312 ✭✭✭twin_beacon


    we have one tractor with a loader. we take off the spreader when filling. The spreader had the quick attach hooks for the lift arms, then just a matter of attaching the top link and pto.


  • Registered Users, Registered Users 2 Posts: 12,297 ✭✭✭✭Sam Kade


    The legs look very light for holding I tonne. You would need something like boxed channel to support that weight and to last. That contraption will be rotting in the ditch in a few years.


  • Advertisement
  • Closed Accounts Posts: 3,433 ✭✭✭darragh_haven


    micraX wrote: »
    No one else have a forklift?

    My brother used to run his business from our farm but he's moved to a better location and bigger warehouse. His forklift was lwft behind and my dad makes savage use of it. His back thanks the forlifk every day


Advertisement
Advertisement