P1340 Fault Code Pug 308

crasy dash · 04-04-2015 05:16PM #1

Hi all
Car is a peugeot 308 2008 1.4 54000 on the clock serviced two months ago

Car is rarely used to be honest she went out just to start it and run for few min car was very juddery and then 20secs later eml came up i scanned it and it through this code up.
My local mechanic is gone away for the weekend so couldnt ring and ask him for advice

If anyone on here knows the code you might let me know

Thanks
dash

Atlantic Dawn · 04-04-2015 06:59PM

Looks like the coil pack in cylinder 4...

http://www.diagnostic-world.com/pages/peugeot_trouble_code_p1337_p1338_p1339_p1340_how_to_fix_227104.cfm

A new coil pack should be somewhere around €50 for the part and then 15 mins labour on top of that, it's an easy fix if that's all it is.

crasy dash · 04-04-2015 07:20PM

Thanks for the reply that shouldn't be too bad to fix if its only a coilpack.

On a separate note noticed a sound of air leaking from behind the glovebox area that would stop if I pressed the brake any idea what that is?

hamburg · 05-04-2015 04:06AM

crasy dash wrote: »

Thanks for the reply that shouldn't be too bad to fix if its only a coilpack.

On a separate note noticed a sound of air leaking from behind the glovebox area that would stop if I pressed the brake any idea what that is?

seals in the brake master cylinder?

crasy dash · 06-04-2015 09:55PM

hamburg wrote: »

seals in the brake master cylinder?

Sorry for slow reply been out all day took a look late last night.

Traced it to under glovebox on inside where bar from brake pedal pushes up against well to be honest I wouldn't have a clue what its called haha

hamburg · 07-04-2015 07:09AM

crasy dash wrote: »

Sorry for slow reply been out all day took a look late last night.

Traced it to under glovebox on inside where bar from brake pedal pushes up against well to be honest I wouldn't have a clue what its called haha

master cylinder/brake servo

crasy dash · 07-04-2015 07:43AM

hamburg wrote: »

master cylinder/brake servo

Ya thinks it the servo pissing air.

Will talk to my mechanic later looks like a pig of a job to be honest.

Thanks Hamburg for the help

hamburg · 07-04-2015 08:47PM

no problem.

P1340 Fault Code Pug 308

Comments