Peugeot 206 gears hard to select

andy t · 30-01-2015 08:22PM #1

2003 1.1 peugeot 206...

gears are hard to get , very tight & sometimes

anyone experience this?

sounds like gearbox or linkage.....

blackbox · 31-01-2015 12:19AM

Sounds like clutch isn't disengaging fully.

andy t · 31-01-2015 09:25PM

blackbox wrote: »

Sounds like clutch isn't disengaging fully.

as ive the clutch pressed & go to select a gear it makes a small whining sound,
then when in gear the whine is still there...

take foot off the clutch & it goes away

gibbon75 · 01-02-2015 12:51AM

I'd say the release bearing guide is worn.
Fierce common to go in them, I've sold two of those this week alone.
The part is cheap: it is around 13 Euro, but the gearbox has to come off...

The linkage joints do give trouble as well, but then you wouldn't have the noise.

andy t · 01-02-2015 01:19AM

gibbon75 wrote: »

I'd say the release bearing guide is worn.
Fierce common to go in them, I've sold two of those this week alone.
The part is cheap: it is around 13 Euro, but the gearbox has to come off...

The linkage joints do give trouble as well, but then you wouldn't have the noise.

would the guide come in a new clutch kit (as i might aswell replace the clutch while box is off)

gibbon75 · 02-02-2015 09:56PM

andy t wrote: »

would the guide come in a new clutch kit (as i might aswell replace the clutch while box is off)

No it wouldn't, only the release bearing would come with the clutch kit.

andy t · 03-02-2015 02:12PM

no problem,,, just goin to sell as is now as havnt the time to go at it ,,, pity,as it only passed the nct for a year

Peugeot 206 gears hard to select

Comments