Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

Creda concept electric stand alone hob + oven

  • 19-01-2015 10:13AM
    #1
    harry999
    Registered Users, Registered Users 2 Posts: 623 ✭✭✭


    This cooker was working perfect - but yesterday when using the hob - it tripped the fuse board. And now when I switch it on - it immediately trips the fuse board. It is 5 or 6 years old - got an electrician to look at it but he could see nothing wrong. Any idea if it can be fixed or does it need to be replaced. Thanks


Comments

  • #2
    Billy Bunting
    Registered Users, Registered Users 2 Posts: 2,842 ✭✭✭Billy Bunting


    If there was a spillage it possibly got into the regulators and that's causing the trip, you could try just running the oven for a few hours so the heat from the oven can dry out the hob.


  • #3
    harry999
    Registered Users, Registered Users 2 Posts: 623 ✭✭✭harry999


    I cannot run the oven as if I currently turn on the cooker it immediate trips the fuse board...- so will not heat...


  • #4
    Billy Bunting
    Registered Users, Registered Users 2 Posts: 2,842 ✭✭✭Billy Bunting


    try removing the knobs and use a hairdryer to heat it.


  • #5
    harry999
    Registered Users, Registered Users 2 Posts: 623 ✭✭✭harry999


    Its a ceramic hob - not sure if I can remove - but I can try. Thanks


Advertisement
Advertisement