Horizon box and porting forward

Malabeans · 05-10-2014 08:27PM #1

Hi, I have created a server for Chivalry multiplayer and have put in my Ipv4 address and the correct ports, 7777, 7778 and 27015 but these ports are still closed. Is it possible to do this on Horizon.

Thanks,
Malabeans

06-10-2014 09:57AM

How do you know they're still closed? Note that you can't check them using your external IP from inside your own network. You'll need to test it from a different network

davo2001 · 07-10-2014 03:10PM

28064212 wrote: »

How do you know they're still closed? Note that you can't check them using your external IP from inside your own network. You'll need to test it from a different network

http://canyouseeme.org

Or If NAT Loopback is enabled on the horizon box this can be done. (P.S I don't have a horizon box, just stating the facts)

Malabeans · 07-10-2014 10:21PM

I can see in cmd that each of the three ports I have set to be opened are 0.0.0.0 with no status on the right. They should have my devices IP next to them if I'm hosting a multiplayer server shouldn't they?

07-10-2014 10:55PM

Malabeans wrote: »

I can see in cmd that each of the three ports I have set to be opened are 0.0.0.0 with no status on the right. They should have my devices IP next to them if I'm hosting a multiplayer server shouldn't they?

In cmd? In the command prompt, using netstat? That just sounds like the ports are listening on your machine over UDP, nothing to do with whether your router is forwarding external requests to your machine. Use the http://canyouseeme.org/ tool to check if an external request gets through to the specified ports

Malabeans · 07-10-2014 11:20PM

Just tried that there and it came back saying: Error: I could not see your service on 46.7.199.142 on port (7777)
Reason: Connection timed out

Thanks for all the help by the way

Horizon box and porting forward

Welcome!

Comments

Welcome!