Advertisement
Please note that it is not permitted to have referral links posted in your signature. Keep these links contained in the appropriate forum. Thank you.

https://www.boards.ie/discussion/2055940817/signature-rules
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

How to remove metal door panel on Hyundai Sonata?

  • 11-06-2014 11:12PM
    #1
    Moyglish
    Registered Users, Registered Users 2 Posts: 771 ✭✭✭


    Hi guys,

    Asking this on behalf of a friend.

    He's trying to get in at the inner metal door panel of a 07 Hyundai Sonata.

    He has removed the interior panel, however he's having difficulty removing the inner metal panel.

    He's removed the screws surrounded the edges however there's two flat brass heads about 3/4 inch diameter, and he can't figure out how to remove them - he can't find a thread or slot to unscrew them.

    I have a photo to describe the panel and brass fitting.

    Any ideas on how to unscrew/remove these flat brass fittings? :confused:

    Any help at all would be much appreciated, thanks all :)


Comments

  • #2
    colm_mcm
    Registered Users, Registered Users 2 Posts: 73,328 ✭✭✭✭colm_mcm


    I think that's the window regulator panel?


  • #3
    Tea drinker
    Registered Users, Registered Users 2 Posts: 2,818 ✭✭✭Tea drinker


    Is it really being held only by that or it's just the metal panel is stuck to he gasket between the panels?


  • #4
    Hellrazer
    Moderators, Arts Moderators, Recreation & Hobbies Moderators, Social & Fun Moderators Posts: 11,242 Mod ✭✭✭✭Hellrazer


    colm_mcm wrote: »
    I think that's the window regulator panel?

    Think you're bang on colm.that's the window reg if I remember right.Those brass screws hold the motor on to the reg but the reg is that whole panel so the brass screws can only be removed if the reg is taken off.


  • #5
    Moyglish
    Registered Users, Registered Users 2 Posts: 771 ✭✭✭Moyglish


    colm_mcm wrote: »
    I think that's the window regulator panel?

    Yes, I think it's the window regulator panel alright, sorry didn't have the correct terminology, just asking on behalf of a friend :)
    Tea drinker wrote: »
    Is it really being held only by that or it's just the metal panel is stuck to he gasket between the panels?

    He doesn't think it's stuck to the gasket.
    Hellrazer wrote: »
    Think you're bang on colm.that's the window reg if I remember right.Those brass screws hold the motor on to the reg but the reg is that whole panel so the brass screws can only be removed if the reg is taken off.

    Thanks, he's going to try that tomorrow.

    Is the regulator the motor that's outside the panel?

    Thanks for all the help guys, really appreciate it, wasn't expecting any replies so soon and so late at night - I'll pass the info on! :)


  • #6
    colm_mcm
    Registered Users, Registered Users 2 Posts: 73,328 ✭✭✭✭colm_mcm


    Has he taken the glass out first?


  • Advertisement
  • #7
    Moyglish
    Registered Users, Registered Users 2 Posts: 771 ✭✭✭Moyglish


    Nope, he hasn't. Should he have?

    Edit: He just said he can't til he takes the panel out first.


  • #8
    colm_mcm
    Registered Users, Registered Users 2 Posts: 73,328 ✭✭✭✭colm_mcm


    There's two big holes for putting a socket through and removing bolts holding the glass on

    IIRC if he needs the window reg panel out he has to take off the outside door handle and lock/latch as its all one unit.

    Does he actually need to take the reg out or what?


Advertisement
Advertisement