PS 3 ERROR CODE 8002F1F0

tony300+ · 18-01-2014 11:39AM #1

tony300+
can anyone help. my PS3 is stuck in a softwear update loop. error 8002f1f0.
i can't access any other functions, start in safe mode etc....
every time i turn it on it starts the update and stops at 70 or 71 %.
i've tried pulling the HDD during instalation as suggested on other sites but no change.
PLEEEEEESE HEELP :mad::mad::mad::mad::mad::mad:

F1ngers · 18-01-2014 12:09PM

tony300+ wrote: »

tony300+
can anyone help. my PS3 is stuck in a softwear update loop. error 8002f1f0.
i can't access any other functions, start in safe mode etc....
every time i turn it on it starts the update and stops at 70 or 71 %.
i've tried pulling the HDD during instalation as suggested on other sites but no change.
PLEEEEEESE HEELP :mad::mad::mad::mad::mad::mad:

Never a good idea....

Does it automatically start the the update?
Re-download the the update and use it - your update may be corrupted.

tony300+ · 18-01-2014 04:08PM

every time i turn it on it starts the download and stops at 70%.
i cant get into the menu

tony300+ · 18-01-2014 05:38PM

:confused i guess there are no answers here either

:(:(:(

F1ngers · 18-01-2014 10:58PM

tony300+ wrote: »

:confused i guess there are no answers here either :(:(:(

In fairness, no one on boards.ie would've suggested "pulling out the HDD" mid-install.

Seriously, what were you thinking?

KeithTS · 19-01-2014 11:21AM

There's two stages to an update, downloading the update and then instaling it.
When your update fails, what stage is it at, downloading or installing?

It sounds to me like it could be a hardware issue - I can't find the exact code on any Sony code checkers or anything.
Have you ever taken the ps3 apart or had a part replaced? During an install the system checks all drives, connections and so on. So, for instance, if you have a blueray drive that's not connected properly or a faulty bluetooth module that you haven't noticed then during the update a test is performed and if any peripheral fails, the update will fail.

eddhorse · 19-01-2014 01:32PM

Download the update onto a USB stick amd try the update that way.

Also never pull the hard drive out without the unit being powered off.

Ed

tony300+ · 19-01-2014 07:41PM

KeithTS wrote: »

There's two stages to an update, downloading the update and then instaling it.
When your update fails, what stage is it at, downloading or installing?

It sounds to me like it could be a hardware issue - I can't find the exact code on any Sony code checkers or anything.
Have you ever taken the ps3 apart or had a part replaced? During an install the system checks all drives, connections and so on. So, for instance, if you have a blueray drive that's not connected properly or a faulty bluetooth module that you haven't noticed then during the update a test is performed and if any peripheral fails, the update will fail.

it stops at 70% of the download error 8002F1F0

tony300+ · 19-01-2014 07:44PM

eddhorse wrote: »

Download the update onto a USB stick amd try the update that way.

Also never pull the hard drive out without the unit being powered off.

Ed

yes have tried that also

Varik · 20-01-2014 04:39AM

Had this before, the OP is mistaken in saying it's stuck at the download when he was asked. The loop begins as soon as the PS3 is started before entering the XMB, It can't be interrupted and you can't enter the service mode to update from a new source (USB) rather than the corrupt original download.

The easiest way to sort it is to replace the HDD with a new one, this does not need to be permanent as the original HDD with the OP's files/saves can be put back in after the update is complete and the PS3 is working again. With a new HDD the PS3 will first want to format it and then install the system firmware which you will have on a USB stick, this breaks the loop and installed a working firmware. When the PS3 is working you can now put the old HDD back in.

Find the Cheapest HDD (make sure it's the right size to fit) you can or if you want a larger one get that and use it later after you've fixed the issue and backed up anything.

If you don't want to spend any money and are able you can just format your PS3 current HDD in a PC or HDD enclosure and then reuse it but this will wipe all saves and downloads on the HDD.

tony300+ · 20-01-2014 08:04PM

Varik wrote: »

Had this before, the OP is mistaken in saying it's stuck at the download when he was asked. The loop begins as soon as the PS3 is started before entering the XMB, It can't be interrupted and you can't enter the service mode to update from a new source (USB) rather than the corrupt original download.

The easiest way to sort it is to replace the HDD with a new one, this does not need to be permanent as the original HDD with the OP's files/saves can be put back in after the update is complete and the PS3 is working again. With a new HDD the PS3 will first want to format it and then install the system firmware which you will have on a USB stick, this breaks the loop and installed a working firmware. When the PS3 is working you can now put the old HDD back in.

Find the Cheapest HDD (make sure it's the right size to fit) you can or if you want a larger one get that and use it later after you've fixed the issue and backed up anything.

If you don't want to spend any money and are able you can just format your PS3 current HDD in a PC or HDD enclosure and then reuse it but this will wipe all saves and downloads on the HDD.

thank you very much. the clearest explanation i have got so far. where is the cheapest place to buy a new HDD. thank you

Varik · 20-01-2014 08:26PM

tony300+ wrote: »

thank you very much. the clearest explanation i have got so far. where is the cheapest place to buy a new HDD. thank you

If you or someone you know has an old laptop lying around the HDD from that will likley work, but otherwise it depends on if you want use this new HDD in the future or just to sort this particular issue out.

What size is the HDD you have in the PS3 already?

tony300+ · 20-01-2014 08:44PM

Varik wrote: »

If you or someone you know has an old laptop lying around the HDD from that will likley work, but otherwise it depends on if you want use this new HDD in the future or just to sort this particular issue out.

What size is the HDD you have in the PS3 already?

250 GB

tony300+ · 20-01-2014 08:46PM

Varik wrote: »

If you or someone you know has an old laptop lying around the HDD from that will likley work, but otherwise it depends on if you want use this new HDD in the future or just to sort this particular issue out.

What size is the HDD you have in the PS3 already?

I HAVE AN OLD ACER LAPTOP WITH A BROKEN SCREEN. WOULD I HAVE TO WIPE THE HDDON THAT BEFORE I PUT IT IN THE PS3

F1ngers · 20-01-2014 08:55PM

tony300+ wrote: »

I HAVE AN OLD ACER LAPTOP WITH A BROKEN SCREEN. WOULD I HAVE TO WIPE THE HDDON THAT BEFORE I PUT IT IN THE PS3

No.

Varik · 20-01-2014 09:39PM

tony300+ wrote: »

250 GB

tony300+ wrote: »

I HAVE AN OLD ACER LAPTOP WITH A BROKEN SCREEN. WOULD I HAVE TO WIPE THE HDDON THAT BEFORE I PUT IT IN THE PS3

It's fine and the PS3 will wipe the HDD itself, then when everything is working put the original HDD back in.

This assumes that the original HDD is working and pulling it out before didn't damage it or corrupt the data on it. Make sure everything is powered off when changing the HDD

tony300+ · 20-01-2014 10:23PM

Varik wrote: »

It's fine and the PS3 will wipe the HDD itself, then when everything is working put the original HDD back in.

This assumes that the original HDD is working and pulling it out before didn't damage it or corrupt the data on it. Make sure everything is powered off when changing the HDD

thanks varik.... you are very helpful......i'll let you know how i get on:)

WINTZS · 19-03-2015 12:35PM

hi tony300+ can you tell me how you went on as i have the same problem .........???

cheers.

tony300+ · 19-03-2015 02:43PM

WINTZS wrote: »

hi tony300+ can you tell me how you went on as i have the same problem .........???

cheers.

NO luck:mad:did manage to get it back to the start menu but it still stalls on update. I was then told if i could take out the battery from the mother board i would be able to reset it. i gave up at this stage and bought a new one.

Vyse · 19-03-2015 05:24PM

I had a similar issue many years ago. The hard drive got corrupted due to the PS3 not being shut down properly. I had to take out the hard drive and format it. Ended up connecting the hard drive to my PC with some stuff I bought on eBay.

Don't ask me the specifics, it was about 7 years ago.

Kenjataimu · 19-03-2015 07:46PM

WINTZS wrote: »

hi tony300+ can you tell me how you went on as i have the same problem .........???

cheers.

Anytime I see someone bumping a thread & asking for help with the same problem, it always reminds me of this:

budman9 · 20-03-2015 10:42PM

Hi,
what PS3 model do you have? That error is on 99% wifi or bluetooth problem.

PS 3 ERROR CODE 8002F1F0

Comments