Aritech CS450

Bellboy147 · 16-09-2013 02:55PM #1

Hi ,Im a newbie to boards so im apologising in advance for all the errors im going to make, firstly I hope im in the right section, and secondly that you can help me.I just got a cd3008 key pad and want to add it as a second entry at my back door ,i have an Aritech cs450 panel. Does anyone know the connections. Thanks

KoolKid · 16-09-2013 05:44PM

A B C B From the keypad goes into 19 20 22 22 on the panel .
Set the dips on the keypad to 1 on.

After you connect it enter your Engineer code
Goto outputs /remote's & press the correct key
Goto install remote's & press the correct key
The display should show kk** is so press the correct key.
To leave engineer press XXX and when Goodbye displays press the correct key.

Bellboy147 · 16-09-2013 07:20PM

Thanks KoolKid,will try that tomorrow

kub · 16-09-2013 08:41PM

KoolKid wrote: »

A B C B From the keypad goes into 19 20 22 22 on the panel .
Set the dips on the keypad to 1 on.

After you connect it enter your Engineer code
Goto outputs /remote's & press the correct key
Goto install remote's & press the correct key
The display should show kk** is so press the correct key.
To leave engineer press XXX and when Goodbye displays press the correct key.

It feels like a long long time since I last did that, now did that come from memory or did you have it written down?

KoolKid · 16-09-2013 09:04PM

Those Aritech menus are forever implanted in my brain.;)

Bellboy147 · 18-09-2013 02:21PM

Thanks KoolKid, that worked fine, appreciate help

KoolKid · 18-09-2013 02:35PM

Bellboy147 wrote: »

Thanks KoolKid, that worked fine, appreciate help

Your welcome. If you need any more information you know where we are.

Aritech CS450

Comments