Atlantic Undersink heater 6 bar safetys. any problems

corkgsxr · 2013-09-16 11:24:37

In the last month iv had 2 6 bar valves fail not long after heater was installed. One the head came off the valve body The other was leaving continuous water out when pressure is nowhere near 6 bar. Anyone else have issues with the supplied 6 bar valves

16-09-2013 12:24PM

#1

corkgsxr

Registered Users, Registered Users 2 Posts: 3,388 ✭✭✭

Join Date: October 2012

Posts: 3234

In the last month iv had 2 6 bar valves fail not long after heater was installed.

One the head came off the valve body

The other was leaving continuous water out when pressure is nowhere near 6 bar.

Anyone else have issues with the supplied 6 bar valves

0

Comments

#2 16-09-2013 01:00PM

shane0007

Closed Accounts Posts: 4,677 ✭✭✭

Join Date: February 2012

Posts: 4613

No, haven't fitted those ones but I would certainly give their Technical Support a call. You may find that they have changed suppliers & they have an inherent fault across the board with them.
If they are aware of an issue, they will have a replacement that will still validate the warranty otherwise fitting a non-specified one may or may not affect the warranty.

0