Riello Oil Burner? Wont Bleed??

Bilbert55 · 2013-09-02 15:50:03

I've tried to bleed this about 30 times?? i get a small amount of air + kerosene on a few occasions but most of the times its just air.... I've 300 litres in the tank and checked to see valves etc at the tank and the boilers are correct? is there any other thing i could try?

02-09-2013 04:50PM

#1

Bilbert55

Registered Users, Registered Users 2 Posts: 93 ✭✭

Join Date: December 2008

Posts: 62

I've tried to bleed this about 30 times?? i get a small amount of air + kerosene on a few occasions but most of the times its just air.... I've 300 litres in the tank and checked to see valves etc at the tank and the boilers are correct?

is there any other thing i could try?

0

Comments

#2 02-09-2013 08:41PM

sullzz

Registered Users, Registered Users 2 Posts: 2,409 ✭✭✭

Join Date: January 2009

Posts: 2321

Bilbert55 wrote: »

I've tried to bleed this about 30 times?? i get a small amount of air + kerosene on a few occasions but most of the times its just air.... I've 300 litres in the tank and checked to see valves etc at the tank and the boilers are correct?

is there any other thing i could try?

Is there oil getting past the fire valve , is the filter clear

0
#3 02-09-2013 09:27PM

scudo2

Closed Accounts Posts: 2,008 ✭✭✭

Join Date: July 2012

Posts: 1953

Sent you a PM

0
#4 02-09-2013 09:56PM

corkgsxr

Registered Users, Registered Users 2 Posts: 3,388 ✭✭✭

Join Date: October 2012

Posts: 3234

Disconnect the fuel line and see if you get a steady flow. If not its a airlock in the fuel line

0