Today I ordered

roast · 21-06-2013 06:58PM

Just ordered some V3 clearomizers and a bunch of replacement coils.
Only started vaping a few weeks ago and had gotten two V2s at the time. One didn't work, and the second seems to develop a burning taste after a few hours of using it, even after cleaning and keeping full. Hoping the V3 performs a little better for me.

Mr. Chrome · 21-06-2013 07:03PM

Thecageyone wrote: »

Still awaiting the Vamo V3 I ordered from "Fasttech" 11 days ago. Not so fast then, eh?

I'm betting customs have it and are scratching their holes, wondering what to do as it's only €24 worth. They're entitled to about €4.50 in charges. No doubt they will add on an extra re-postal charge too. &*^%$

Please tell me you didnt get the rhinestone version ;-)

the_syco · 21-06-2013 08:04PM

from e-smokeireland
Yesterday; ordered yesterday, posted out today, before lunchtime
Kanger T3s Replacement Head - 1.7-1.9ohms (for the T3, opsy)
18350 Battery
Wingnut's Premium E-liquid: Kamikaze - 30ml - 20mg
Wingnut's Premium E-liquid: Jungle Juice - 20mg - 10ml

Today; collected from the store
Kanger T3s Clearomizer (at least now I have spares

)
Drip Tip - Black (t'was for the Clearomizer, but found that they're different shapes)

Also, the T3s head screws off using my fingers; the T3 head wouldn't screw off, even when using pliars! So, kinda better I got the T3s in the long run, I suppose.

=-=

First off, taped up the clearo, as it suits the e-Pipe better.

Anyone know how to take the mouth piece off once Clearomizer to put on another? Want to replace the (new, right) clear one, with the (old, left) black one.

=-=

Just tried the "Wingnut's Premium E-liquid: Kamikaze" with the T3s, and finder it "thicker" than the last e-liquid, which was the Dekang banana flavour with the T3. Nicer feel, and a nice hit off it. Although the flavour was "fruity", I could not taste any singular taste. In the past, I've gotten some where one flavour or other would be strong, but this seems to be a very even mix. Look forward to the "Jungle Juice" when I vape the juice out of this clearo.

platinums · 21-06-2013 09:07PM

Mr. Chrome wrote: »

Its a bit daft that they give you a dual coil set up, and only 1 hole.

Where from?, I love the IGO-L i have, now ditched the aga-t2 in favour of dripping. Can the Igo W improve on the L?

Rattleshakes · 21-06-2013 11:11PM

platinums wrote: »

Where from?, I love the IGO-L i have, now ditched the aga-t2 in favour of dripping. Can the Igo W improve on the L?

Get this! http://pink-mule.com/NIMBUS-ATOMIZER-REBUILDABLE

Mr. Chrome · 22-06-2013 12:19AM

platinums wrote: »

Where from?, I love the IGO-L i have, now ditched the aga-t2 in favour of dripping. Can the Igo W improve on the L?

The IGO W is a clone of the nimbus. Dont know where Artyeva got hers, havent seen it for sale here.

Vaperus · 22-06-2013 10:06AM

ESI is meant to be getting the W in

Rattleshakes · 22-06-2013 01:20PM

Vaperus wrote: »

ESI is meant to be getting the W in

What about yourself Vaperus?Or maybe the Nimbus V2??

Rattleshakes · 22-06-2013 01:40PM

roast wrote: »

Just ordered some V3 clearomizers and a bunch of replacement coils.
Only started vaping a few weeks ago and had gotten two V2s at the time. One didn't work, and the second seems to develop a burning taste after a few hours of using it, even after cleaning and keeping full. Hoping the V3 performs a little better for me.

If they're not Vision V3's they're just clones and are one serious headache.

redkid · 22-06-2013 06:45PM

platinums wrote: »

Where from?, I love the IGO-L i have, now ditched the aga-t2 in favour of dripping. Can the Igo W improve on the L?

Has anyone modified the L by making the hole bigger or drilling another one?

EGriff · 22-06-2013 08:01PM

Gummy Bears - 30ml - 12mg
Jungle Juice - 12mg - 10ml
Vampires Kiss - 10ml - 12mg
SS Mesh CE8 Clearomizer
Kanger T5
Kanger T5 Replacement Head - 2.1-2.2ohms

My first lot of juices was a sample kit and the only 2 I liked at all were gummy bears and ectoplasmic v2, the tobacco flavoured ones didn't agree with me at all so I decided to go with all fruity juices for my second round.

I was very tempted to get the DS mod and an IGO-L but I don't think I can be bothered wicking or coiling and all that mad stuff just yet. Might get a mod and the protank next week.

Thecageyone · 22-06-2013 08:03PM

Mr. Chrome wrote: »

Please tell me you didnt get the rhinestone version ;-)

It didn't actually specifiy, think it's just plain - I hope!

Just got an email today, it's only being dispatched now ... 12 days later.

artyeva · 22-06-2013 08:49PM

Thecageyone wrote: »

It didn't actually specifiy, think it's just plain - I hope!

Just got an email today, it's only being dispatched now ... 12 days later.

they had a holiday for the boat festival, maybe you ordered on that day or something. plus it's shipped from singapore. i've only ever waited 10 working days [mon-fri] for anything from them.

artyeva · 22-06-2013 08:51PM

Mr. Chrome wrote: »

The IGO W is a clone of the nimbus. Dont know where Artyeva got hers, havent seen it for sale here.

i got mine from cletic vapes in the UK, couldn't fault them.

ESI are getting them in but i'd already ordered mine by the time i found that out. typical.

artyeva · 22-06-2013 08:53PM

redkid wrote: »

Has anyone modified the L by making the hole bigger or drilling another one?

yes. learn from my mistakes - measure yer drill bit first

jamie72 · 22-06-2013 09:51PM

artyeva wrote: »

i got mine from cletic vapes in the UK, couldn't fault them.

ESI are getting them in but i'd already ordered mine by the time i found that out. typical.

There'd be no point attempting that on an ego twist battery would there? Built a dual coil on the standard igo l and couldn't power it.

artyeva · 22-06-2013 09:59PM

for all intents and purposes the only difference between the igo-l and the igo-w is the shape and extra post.

Rattleshakes · 23-06-2013 05:27AM

artyeva wrote: »

for all intents and purposes the only difference between the igo-l and the igo-w is the shape and extra post.

How good is it?

Rattleshakes · 23-06-2013 05:30AM

redkid wrote: »

Has anyone modified the L by making the hole bigger or drilling another one?

I made it bigger by using a 1.5mm drill bit and it definitely improved it for me.

redkid · 23-06-2013 09:58AM

artyeva wrote: »

yes. learn from my mistakes - measure yer drill bit first

Did ya drill a new one of make the old one bigger?

redkid · 23-06-2013 10:00AM

Rattleshakes wrote: »

I made it bigger by using a 1.5mm drill bit and it definitely improved it for me.

I think I may do that, I prefer the draw a bit more airy, don't like the idea of doing it though.

artyeva · 23-06-2013 11:24AM

redkid wrote: »

Did ya drill a new one of make the old one bigger?

Made the existing hole bigger but instead of a light nudging towards an airier draw, ended up with a cyclone. Thankfully I'd bought it as a spare in case I *did* bugger it up. I must be psychic. :-)

Rattleshakes · 23-06-2013 05:23PM

redkid wrote: »

I think I may do that, I prefer the draw a bit more airy, don't like the idea of doing it though.

Its over before you know it

and its not just the draw it improves,vapour production is also increased.

Just dont use a friggin Kango Hammer like artyeva did :rolleyes:

redkid · 24-06-2013 12:03AM

Rattleshakes wrote: »

Its over before you know it and its not just the draw it improves,vapour production is also increased.

Just dont use a friggin Kango Hammer like artyeva did :rolleyes:

il try not to, should be here tomorrow so we'll see then.

Elbow · 26-06-2013 12:33PM

An Annunaki Sun atty from epipemods

Going to looks the bollocks on the touchwood!

Ionised · 26-06-2013 12:45PM

Ordered the 18650 tube for my GT paps lux. Have been waiting for them to come back in stock for a while.

heliguyheliguy · 26-06-2013 01:16PM

Elbow wrote: »

An Annunaki Sun atty from epipemods

Going to looks the bollocks on the touchwood!

really nice

Elbow · 26-06-2013 01:30PM

If it turns out to be crap Superneat is getting blamed!

jamie72 · 26-06-2013 01:37PM

Today I ordered:

Hangsen RY4, 12mg, VG
Hangsen RY4, 18mg, VG
Hangsen RY4, 12mg, PG/VG
Hangsen RY4, 18mg, PG/VG

My friend can't take e-cigs as they make her gag, determined to find out why with this mix. Bargain Vapour offer €2 samples, so this seemed the best way to figure it out. Going to start with the first one and see how we get on.

heliguyheliguy · 26-06-2013 01:40PM

jamie72 wrote: »

Today I ordered:

Hangsen RY4, 12mg, VG
Hangsen RY4, 18mg, VG
Hangsen RY4, 12mg, PG/VG
Hangsen RY4, 18mg, PG/VG

My friend can't take e-cigs as they make her gag, determined to find out why with this mix. Bargain Vapour offer €2 samples, so this seemed the best way to figure it out. Going to start with the first one and see how we get on.

could just be the ry4, horrible stuff

Today I ordered

Comments