Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

Port forwarding to multiple static ips Zyxel P-660HN-T1A_IPv6

  • 23-05-2013 04:25PM
    #1
    Posts: 27,583 ✭✭✭✭ Spencer Flaky StereoType


    I have the latest firmware installed.
    Whenever i try and forward the same port to multiple IP's i get the below;

    fapitu.jpg

    I have 2 static IP's created, one for xbox and one for the pc.

    I can only forward port 3074 to one or the other its driving me nuts.


Comments

  • Registered Users, Registered Users 2 Posts: 682 ✭✭✭Xantia


    Yes you can only forward a port to one IP address.
    If you have 2 xbox'es then the easiest way is to turn on UPnP on the router


  • Posts: 27,583 ✭✭✭✭ Spencer Flaky StereoType


    Xantia wrote: »
    Yes you can only forward a port to one IP address.
    If you have 2 xbox'es then the easiest way is to turn on UPnP on the router
    UPNP is already on but moderate nat received on xbox regardless. Bit of a balls to be honest.


  • Registered Users, Registered Users 2 Posts: 682 ✭✭✭Xantia


    I have found that with upnp on that it does not matter when 2 xboxes are connected.
    Remove the port forwarding and leave the upnp sort out the fact that you have 2 connected.
    I have had it working - that is to say my son and his friend who were using 2 xboxes connected to the lan did not complain.


Advertisement