gas or aeg buffer

Untamedlemon · 22-01-2013 09:56PM #1

Hello all, im wondering whether these buffer tubes are for a gas m4 or aimply a different type of aeg

Untamedlemon · 22-01-2013 09:57PM

Second buffer:

Jsmurff · 22-01-2013 10:28PM

They look like AEG buffers to me but I could be wrong the two short groves would line up with the small tube that sticks out the backside of an AEG receiver

Untamedlemon · 22-01-2013 10:35PM

They fit on a receiver all right but there isnt any way to keep it in place with the screw kinda like a hybrid buffer tube!!

Jsmurff · 22-01-2013 11:07PM

Do you have the plate washer that sits inside the tube? It acts like a clamp holding the stock tube to the receiver if you do and it still wobbles then the screw may be too long but I have never heard of a hybrid stock tube

Untamedlemon · 22-01-2013 11:11PM

There was never any washer and I know theres no hybrid buffer.....just joking!!!!

T4RGET · 22-01-2013 11:24PM

they're both AEG buffer tube, or stock tubes is probably a more accurate name

You need this, the little semi-circle under the buffer tube with the hole in it. The screw in the picture fits through that washer and then attaches to the back of the gearbox keeping the buffer tube one. You can get those washer in full circles but the semi-circular ones are used for rear wired gearboxes.

http://shop.ehobbyasia.com/madbull-ace-m4-acu-stock-tube.html

Hope it helps

.

Untamedlemon · 22-01-2013 11:26PM

T4RGET wrote: »

they're both AEG buffer tube, or stock tubes is probably a more accurate name

You need this, the little semi-circle under the buffer tube with the hole in it. The screw in the picture fits through that washer and then attaches to the back of the gearbox keeping the buffer tube one. You can get those washer in full circles but the semi-circular ones are used for rear wired gearboxes.

http://shop.ehobbyasia.com/madbull-ace-m4-acu-stock-tube.html

Hope it helps .

Thanks

gas or aeg buffer

Comments