Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

HKC modem

  • 13-11-2012 11:04AM
    #1
    Airman2
    Registered Users, Registered Users 2 Posts: 9 ✭


    I have HKC system and recently acquired dialler/modem which plugged into my system via ribbon cable. It rings my mobile OK but there is no voice/message. How do I put a message on it?. I think it is a HKC product, has PCB 2028, 8 channel with secure watch, 4 channel stand alone inscribed on board. I also have a bord with aerial attached, 7512 PCB which sat with the other board in it's previous life, not sure what it does. Any info from the fountain of knowledge to newbie would be appreciated. Thanks a million


Comments

  • #2
    altor
    Registered Users, Registered Users 2 Posts: 12,094 ✭✭✭✭altor


    Airman2 wrote: »
    I have HKC system and recently acquired dialler/modem which plugged into my system via ribbon cable. It rings my mobile OK but there is no voice/message. How do I put a message on it?. I think it is a HKC product, has PCB 2028, 8 channel with secure watch, 4 channel stand alone inscribed on board. I also have a bord with aerial attached, 7512 PCB which sat with the other board in it's previous life, not sure what it does. Any info from the fountain of knowledge to newbie would be appreciated. Thanks a million

    This dialer is used to ring a monitoring station rather than your own phone. From the sounds of it you also have a GSM connected to the system. Is the control panel a 6 or 8 zone system?

    www.altor.ie



  • #3
    Airman2
    Registered Users, Registered Users 2 Posts: 9 ✭Airman2


    It is a secure watch 10/10. I have not connected the GSM board but it was part of the setup where it lived previously. As the dialler fitted so easy I am pretty sure it is also HKC product. I have programmed a few numbers which work from my land line, but some message rather than silence would be nice. Thanks Altor.


  • #4
    altor
    Registered Users, Registered Users 2 Posts: 12,094 ✭✭✭✭altor


    Airman2 wrote: »
    It is a secure watch 10/10. I have not connected the GSM board but it was part of the setup where it lived previously. As the dialler fitted so easy I am pretty sure it is also HKC product. I have programmed a few numbers which work from my land line, but some message rather than silence would be nice. Thanks Altor.

    The best option is to add a standalone dialer to the system in conjunction with either a land line or the GSM.

    www.altor.ie



  • #5
    Airman2
    Registered Users, Registered Users 2 Posts: 9 ✭Airman2


    Thanks altar. You reckon that it is not possible to put any messages on my unit.


Advertisement
Advertisement