Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

Specific M4/M16 Parts (see list)

  • 02-11-2012 08:53PM
    #1
    General Grobel
    Registered Users, Registered Users 2 Posts: 722 ✭✭✭


    Right I'm looking for the following:

    Rear-wired...wiring.
    Receiver End-Plate (with some sort of sling mount)
    Hi-cap or mid, so long as it's cheap.
    Barrel, 509mm or longer
    Hop-Unit, with or without rubber
    Cheap sights, preferably rail-mounted.

    I'm not interested in buying a more than I've asked, unless the package is a really good deal.

    Can only do PayPal and postage.


Comments

  • #2
    Hareton
    Registered Users, Registered Users 2 Posts: 1,218 ✭✭✭Hareton


    General Grobel wrote: »
    Right I'm looking for the following:

    Buffer Tube
    Receiver End-Plate (with some sort of sling mount)
    Ver. 2 Gearbox, preferably rear-wired.
    Need 2 mags, Hi-cap or mid, so long as it's cheap.
    Barrel, 509mm or longer
    Hop-Unit, with or without rubber
    Cheap sights, preferably rail-mounted.

    I'm not interested in buying a more than I've asked, unless the package is a really good deal.

    Can only do PayPal and postage.

    Have a g&p lipo buffer tube can do for 12€ posted and PayPal

    Edit: have necessary screw and plate for attachment included


  • #3
    glicster
    Registered Users, Registered Users 2 Posts: 692 ✭✭✭glicster


    General Grobel wrote: »
    Receiver End-Plate (with some sort of sling mount)
    Ver. 2 Gearbox, preferably rear-wired.
    Need 2 mags, Hi-cap or mid, so long as it's cheap.
    Hop-Unit, with or without rubber
    Cheap sights, preferably rail-mounted.

    I have all of the above but the gearbox is wired to the front.its more or less unused,I replaced it with my own gearbox when i got the gun.
    At some point i had to take the trigger block so the one in it doesnt do semi which is ok because you could buy a rear wired trigger set and sort it all out.Its a stock king arms gb with full cylinder.
    The hop unit is metal also from king arms and the rubber is a guarder.
    The mags would be hi cap but i dont know what brand and im not sure on the sights,youve seen the ones i have on my other thread,mbus.
    I cant remember where I got the end plate from but it has sling mounts on it.

    gear box 45
    hop and rubber 15
    mags x2 16
    mbus 15
    end plate,free

    shipping and paypal extra(Id say it would be around the €10 mark for shipping)

    all this stuff is packed away so let me know if your interested and ill dig them out for pics


  • #4
    Johnny.G
    Registered Users, Registered Users 2 Posts: 333 ✭✭Johnny.G


    Hi

    I have a k.w.a. 6.04 mm 509 mm barrel for sale in this thread.http://www.boards.ie/vbulletin/showthread.php?t=2056752350
    let me no how it suits.Also I have a 60* madbull hop rubber with bucking if you want it id be willing to part with it for €5.


  • #5
    General Grobel
    Registered Users, Registered Users 2 Posts: 722 ✭✭✭General Grobel


    @Johnny.G

    Is that 5e for the barrel? Is there anything wrong with it?

    @glicster

    GB is out of my price range I'm afraid, looking for an ACM GB to keep the cost down. Best I could do otherwise is 30e for the Hop unit without rubber (not a fan of the Guarder rubbers), one mag and the sights, and the free end plate (cheers). So, breaking it down, that would be me offering 10e for the mbus, 10e for the hop-unit and 8e for a mag, for a total of 28e rounded up to 30e.

    @Hareton

    Sorry, was looking through my parts and I realized that I already have a spare buffer tube.


  • #6
    Johnny.G
    Registered Users, Registered Users 2 Posts: 333 ✭✭Johnny.G


    General Grobel wrote: »
    @Johnny.G

    Is that 5e for the barrel? Is there anything wrong with it?

    @glicster

    GB is out of my price range I'm afraid, looking for an ACM GB to keep the cost down. Best I could do otherwise is 30e for the Hop unit without rubber (not a fan of the Guarder rubbers), one mag and the sights, and the free end plate (cheers). So, breaking it down, that would be me offering 10e for the mbus, 10e for the hop-unit and 8e for a mag, for a total of 28e rounded up to 30e.

    @Hareton

    Sorry, was looking through my parts and I realized that I already have a spare buffer tube.

    Yes it is. There is nothing wrong with the barrel I just swapped it out with a madbull black python but I feel it was a waste of money as there was about 5mm of accuracy added to the grouping.


  • Advertisement
  • #7
    General Grobel
    Registered Users, Registered Users 2 Posts: 722 ✭✭✭General Grobel


    Well I'll take then so, to PMs?


  • #8
    Johnny.G
    Registered Users, Registered Users 2 Posts: 333 ✭✭Johnny.G


    just to clear this up who are you referring to


  • #9
    General Grobel
    Registered Users, Registered Users 2 Posts: 722 ✭✭✭General Grobel


    Johnny.G wrote: »
    just to clear this up who are you referring to

    That would be you.


  • #10
    Johnny.G
    Registered Users, Registered Users 2 Posts: 333 ✭✭Johnny.G


    right grand so pm inbound


  • #11
    glicster
    Registered Users, Registered Users 2 Posts: 692 ✭✭✭glicster


    Dude i have to pull the hop unit.its missing a dial.
    Also if u give 15 for the mbus and 8 for the mag and end plate ill stick them in the box with the moe kit and ill cover rhe extra postage costs. So 23 into my paypal tonight and you should have everything on tuesday. Sorry for delay in replying.


  • Advertisement
  • #12
    General Grobel
    Registered Users, Registered Users 2 Posts: 722 ✭✭✭General Grobel


    glicster wrote: »
    Dude i have to pull the hop unit.its missing a dial.
    Also if u give 15 for the mbus and 8 for the mag and end plate ill stick them in the box with the moe kit and ill cover rhe extra postage costs. So 23 into my paypal tonight and you should have everything on tuesday. Sorry for delay in replying.

    No worries,

    Stick in the hop-unit with missing dial and I'll give you 30e


  • #13
    glicster
    Registered Users, Registered Users 2 Posts: 692 ✭✭✭glicster


    General Grobel wrote: »

    No worries,

    Stick in the hop-unit with missing dial and I'll give you 30e

    Deal so, you have my details.


Advertisement
Advertisement