Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

Help - tikka t3 bolt.....

  • 27-10-2012 04:42PM
    #1
    Registered Users, Registered Users 2 Posts: 1,165 ✭✭✭


    Havent seen this before but my bolt is misaligned when i attempt to re chamber it:(..... the pin is out/protruding on the bolt so i assume it is in the fired position.....when i slot it in it appears that bottom grove (at the knob end) is out of line , it appeares to be in the closed position causing the bolt shroud to bottom out, is there a quick fix? may go out tommo morning..........cheers.


Comments

  • Closed Accounts Posts: 566 ✭✭✭Tikkat3


    Havent seen this before but my bolt is misaligned when i attempt to re chamber it:(..... the pin is out/protruding on the bolt so i assume it is in the fired position.....when i slot it in it appears that bottom grove (at the knob end) is out of line , it appeares to be in the closed position causing the bolt shroud to bottom out, is there a quick fix? may go out tommo morning..........cheers.

    Dont panic.

    This should help you out: LINK


  • Registered Users, Registered Users 2 Posts: 1,165 ✭✭✭crackcrack30


    He makes it look easy in the clip but it takes a lot of pressure.....cheers.

    P.S I thought i was going crazy looking at it....


  • Closed Accounts Posts: 566 ✭✭✭Tikkat3


    He makes it look easy in the clip but it takes a lot of pressure.....cheers.

    P.S I thought i was going crazy looking at it....

    No worries, I had come across it before :)

    That fella probably has done that many times and like anything, the first time is a head wrecker.

    At least you can get out tomorrow morning now. :)


Advertisement
Advertisement