Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Arcade machine problem.

2»

Comments

  • #32
    Prankzter
    Registered Users, Registered Users 2 Posts: 22 ✭Prankzter


    i tested the PSU with my multi meter and all seems to be ok from the 12v and 5v ports. are the looms with buttons hard to wire up or can i get one thats all wired up and ready to roll with buttons and all cos i figure i'll have to solder the 12v and 5v and grounds to it to get it to work right?


  • #33
    CathalDublin
    Registered Users, Registered Users 2 Posts: 4,155 ✭✭✭CathalDublin


    You don't need to solder anything to wire a new loom.
    You can buy one with the button connectors pre-crimped or crimp them yourself which is advisable as it will be a neater job


  • #34
    Prankzter
    Registered Users, Registered Users 2 Posts: 22 ✭Prankzter


    any suggestions on a site that sends worldwide?


  • #35
    Pyongyang
    Closed Accounts Posts: 5,328 ✭✭✭Pyongyang


    Hmm, not wanting to gatecrash too much, but I don't suppose you know where I can buy a full rewire kit for my New Astro City do you?

    My JAMMA loom is in bits so I fancy giving it a full overhaul.


  • #36
    CathalDublin
    Registered Users, Registered Users 2 Posts: 4,155 ✭✭✭CathalDublin


    Prankzter wrote: »
    any suggestions on a site that sends worldwide?

    http://www.gremlinsolutions.co.uk/products/jammaharness.htm
    Arcadeshop.de


  • Advertisement
  • #37
    CathalDublin
    Registered Users, Registered Users 2 Posts: 4,155 ✭✭✭CathalDublin


    Pyongyang wrote: »
    Hmm, not wanting to gatecrash too much, but I don't suppose you know where I can buy a full rewire kit for my New Astro City do you?

    My JAMMA loom is in bits so I fancy giving it a full overhaul.

    A guy on jamma plus called muddymusic http://www.jammaplus.co.uk/forum/member_profile.asp?PF=3438


  • #38
    Prankzter
    Registered Users, Registered Users 2 Posts: 22 ✭Prankzter


    ok so one more question lol, the loom thats on the poker game fits over the dd3 connectors is there anyway to rewire it to work?


  • #39
    CathalDublin
    Registered Users, Registered Users 2 Posts: 4,155 ✭✭✭CathalDublin


    Prankzter wrote: »
    ok so one more question lol, the loom thats on the poker game fits over the dd3 connectors is there anyway to rewire it to work?

    When you have new jamma loom installed, you can buy or build jamma to whatever you need adapters


  • #40
    Optimus Prime
    Moderators, Computer Games Moderators Posts: 5,400 Mod ✭✭✭✭Optimus Prime


    Prankzter wrote: »
    ok so one more question lol, the loom thats on the poker game fits over the dd3 connectors is there anyway to rewire it to work?

    Your better off doing the whole lot again, seriously its easy, you wont have a problem, there will be no messing around. it will take you about 30 minutes to put a new harness in there if you get one thats pre-crimped. it will saving you messing around with whats in there trying to figure out what goes where.


  • #41
    CathalDublin
    Registered Users, Registered Users 2 Posts: 4,155 ✭✭✭CathalDublin


    Prankzter wrote: »
    the loom thats on the poker game fits over the dd3 connectors is there anyway to rewire it to work?
    If you plugged the dd3 board into the loom the way its wired now there is a high chance you've killed the dd3 board, depending on whether or not the psu tripped out and what voltages ended up where.


  • Advertisement
Advertisement