Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

Aritech CS350 open PIR and PA zones

2»

Comments

  • #32
    Pablo007
    Registered Users, Registered Users 2 Posts: 23 ✭Pablo007


    Okay job's done. 06 PA no longer shows up as an open zone.


  • #33
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,790 Mod ✭✭✭✭KoolKid


    Is that with the 2 disconnected?
    No reconnect them one by one to see which one is the problem.


  • #34
    Pablo007
    Registered Users, Registered Users 2 Posts: 23 ✭Pablo007


    Yes, that was with them both disconnected.

    I've just reconnected the downstairs PA and 06 PA is still not showing up as an open zone.

    Should I go ahead and reconnect the upstairs PA?


  • #35
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,790 Mod ✭✭✭✭KoolKid


    Yes. If it still shows often then there is a problem with that PA.


  • #36
    Pablo007
    Registered Users, Registered Users 2 Posts: 23 ✭Pablo007


    Okay, I've just reconnected the upstairs PA and 06 PA is still not showing up as an open zone.:) Does that mean we've solved the open 06 PA zone problem?


  • Advertisement
  • #37
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,790 Mod ✭✭✭✭KoolKid


    Sometimes it happens like that. If all is good close everything up and see how it goes .


  • #38
    Pablo007
    Registered Users, Registered Users 2 Posts: 23 ✭Pablo007


    Was it just a matter of reseating the PA connections?

    What about 05 PIR showing as an open zone when I first display open zones? Is that a feature that I just accept?


  • #39
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,790 Mod ✭✭✭✭KoolKid


    Could have just been a loose connection somewhere.
    Are you sure the PiR wasn't just picking you up going back and forth to the keypad ?


  • #40
    Pablo007
    Registered Users, Registered Users 2 Posts: 23 ✭Pablo007


    Daah...you're spot on!

    That's fantastic - Thank you so much for all your help and for your patience.


  • #41
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,790 Mod ✭✭✭✭KoolKid


    You are welcome. Glad we could get you sorted.


  • Advertisement
  • #42
    Pablo007
    Registered Users, Registered Users 2 Posts: 23 ✭Pablo007


    06 PA is back showing up as an open zone.:mad:


  • #43
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,790 Mod ✭✭✭✭KoolKid


    Close them off one by one again. Its still possible one of those panic buttons could be faulty.


  • #44
    Pablo007
    Registered Users, Registered Users 2 Posts: 23 ✭Pablo007


    Okay 06 PA open zone symptom no longer showing with downstairs PA disconnected and upstairs PA connected.

    This suggests a problem with the downstairs PA. So what's the most likely cause, a problem with the wiring or with the PA itself?


  • #45
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,790 Mod ✭✭✭✭KoolKid


    Leave it closed off for a week or so . If it stays OK replace the PA.


  • #46
    Pablo007
    Registered Users, Registered Users 2 Posts: 23 ✭Pablo007


    Okay, thanks again for your help.


Advertisement