Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.
Current status: https://keepboardsalive.com/
Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
If we do not hit our goal we will be forced to close the site.
Current status: https://keepboardsalive.com/
Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum
Private Group for paid up members of Boards.ie. Join the club.
Private Group for paid up members of Boards.ie. Join the club.
Two PCs on Domain with same ip
-
24-07-2012 01:48PM#1hope someone can help, I was doing an inventory on a Domain and two PCs are reporting the same IP address but not conflicting
anyone an explanation for this? as I cant work out how its possible
C:\Users\admin>ping lindaf
Pinging lindaf.hok.local [192.168.0.216] with 32 bytes of data:
Reply from 192.168.0.216: bytes=32 time=1ms TTL=128
Reply from 192.168.0.216: bytes=32 time<1ms TTL=128
Reply from 192.168.0.216: bytes=32 time<1ms TTL=128
Reply from 192.168.0.216: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.0.216:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 1ms, Average = 0ms
C:\Users\admin>ping finbarrj
Pinging finbarrj.hok.local [192.168.0.216] with 32 bytes of data:
Reply from 192.168.0.216: bytes=32 time<1ms TTL=128
Reply from 192.168.0.216: bytes=32 time<1ms TTL=128
Reply from 192.168.0.216: bytes=32 time<1ms TTL=128
Reply from 192.168.0.216: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.0.216:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms0
Comments
-
-
-
Correct...thanks!
When you save it with Notepad,make sure you save as type: "all files" and not as "*.txt" type !
Also,when you run the CMD command,make sure is ran as administrator or admin privileges !BaconZombie wrote: »Can you paste the below into notepad and save it as Test.bat then open the CLI and run it.
Post back the Boards.log file.ARP -A >> Boards.log ARP -D >> Boards.log ARP -A >> Boards.log PING lindaf ARP -A >> Boards.log ARP -D >> Boards.log PING finbarrj ARP -A >> Boards.log ARP -D >> Boards.log TRACERT lindaf >> Boards.log ARP -A >> Boards.log TRACERT finbarrj >> Boards.log ARP -A >> Boards.log
0
Advertisement