pro-arms m203 grenade leaks

szn80 · 25-01-2012 11:29PM #1

Hi Lads,
I bought a couple of the pro-arm 96rnd black m203 grenades from panda recently and they leak out of the gas input valve.Any ideas how to fix.
Thanks,

T4RGET · 27-01-2012 12:00AM

szn80 wrote: »

Hi Lads,
I bought a couple of the pro-arm 96rnd black m203 grenades from panda recently and they leak out of the gas input valve.Any ideas how to fix.
Thanks,

get a flat head screw driver and take the valve out and put some vaseline on the threads, then put back in, just make sure you don't accidentally unscrew the valve itself

szn80 · 27-01-2012 02:26AM

T4rget what do you mean by not takeing out the valve itself thanks

szn80 · 27-01-2012 02:30AM

many thanks for your help

T4RGET · 27-01-2012 12:15PM

the valve itself can be unscrewed to get access to the little spring and other internals. this came loose on mine when i was cleaning it after i had not used it in ages, luckily, the parts didnt fly far and all i had to do was just pop them all back together.

EDIT: if your worry is that you can remove the valve with the flat head in a wrong way and actually unscrew the vavle. you can't, well shouldn't be able to, just get a flat head and remove the valve from the 40mm and then put vaseline on it, when you look at the valve you should be able to see a line on the lower half of the valve, this is where it separates, so just be careful, it shouldn't happen but just a heads up, hopefully it makes sense, if not i could try get pictures.

szn80 · 30-01-2012 01:13AM

Thanks for the advice worked with one but the other is misthreaded so needs a bit of work.anyway thanks solves my issue thanks. owe you one

T4RGET · 30-01-2012 11:15AM

szn80 wrote: »

Thanks for the advice worked with one but the other is misthreaded so needs a bit of work.anyway thanks solves my issue thanks. owe you one

no problem, it's what the Questions section is here for

pro-arms m203 grenade leaks

Comments