Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

can't get Sky News on Ariva 120

  • 19-01-2012 05:53PM
    #1
    Registered Users, Registered Users 2 Posts: 99 ✭✭


    Hi All. Trying to get Sky News on my Ariva 120. I seem to get no signal on that transponder and a search finds no channels. All other sat channels coming in fine. Any ideas?


Comments

  • Registered Users, Registered Users 2, Paid Member Posts: 5,196 ✭✭✭John mac


    your signal Quality seems very low. maybe your dish needs to be tweaked a little.

    could be part of the problem.


  • Registered Users, Registered Users 2 Posts: 99 ✭✭gkp1


    John mac wrote: »
    your signal Quality seems very low. maybe your dish needs to be tweaked a little.

    could be part of the problem.

    Thanks John. I think this box shows that signal level/quality even with the cable plugged out, it doesn't go down to 0/0. If I move to the next transponder I get signal/quality of 85/76 and a perfect picture. Can a badly aligned dish cause one transponder to have perfect signal and another to have none?


  • Banned (with Prison Access) Posts: 4,285 ✭✭✭Peter Rhea


    What about other high band tps such as 12523 mHz H & V?


  • Registered Users, Registered Users 2 Posts: 99 ✭✭gkp1


    John mac wrote: »
    your signal Quality seems very low. maybe your dish needs to be tweaked a little.

    could be part of the problem.
    Peter Rhea wrote: »
    What about other high band tps such as 12523 mHz H & V?

    Just tried that and I get no signal on that also. What does that indicate?


  • Banned (with Prison Access) Posts: 4,285 ✭✭✭Peter Rhea


    Go to the Antenna Setup menu & check that the lnb frequency is set to 'Universal (9750-10600)'.


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 11,373 ✭✭✭✭Tony


    Try what Peter suggested first and if that does not work check all transponders above 11.700 , if none are present it may well be an lnb problem IE not switching to the high band.

    Owner: satellite.ie Boards discount coupon code is CXBVCY79



  • Registered Users, Registered Users 2 Posts: 99 ✭✭gkp1


    Peter Rhea wrote: »
    Go to the Antenna Setup menu & check that the lnb frequency is set to 'Universal (9750-10600)'.

    Thanks Peter, that was it! It was set to 9750-10550 and changing it to 9750-10600 brought in the missing channels.


Advertisement
Advertisement