6 and 3/4" Pine Wood Flooring (tongue and groove)

pete2009 · 05-09-2011 01:20PM #1

Hi all...anyone know where near to Sligo that I might be able to pick up a bit of 6 and 3/4" Pine Wood Flooring (tongue and groove).

Dont make it anymore, not since the 70's:(.....

thanks

red sean · 05-09-2011 11:32PM

Is it pitch pine you're after pete? Would probably have to go to a salvage yard for it although I have seen some advertised in the Champion small ads now and again. Theres a salvage yard in Enniskillen as far as I know so may be worth looking up golden pages and ringing them.

pete2009 · 06-09-2011 09:36AM

Thanks Sean...indeed pitch pine...thanks for info...some of the main timber suppliers saying "no such thing"...salvage job indeed...cheers:D

pete

sligono1 · 12-09-2011 10:16PM

you may be able to get a lad with a workshop to run you off boards, would you be looking for much yards of it??

pete2009 · 13-09-2011 07:05PM

sligono1 wrote: »

you may be able to get a lad with a workshop to run you off boards, would you be looking for much yards of it??

Thanks #1.. had to do the job using 5 and 1/2" and some nifty saw work..worked out ok...happy enough with it...tried all salvage places..not a bit of 6.5 x 1 to be had..:eek:

cheers

red sean · 13-09-2011 11:10PM

Good man Pete. Did you have old 5x1/2's or did you manufacture from new?

pete2009 · 14-09-2011 04:38PM

red sean wrote: »

Good man Pete. Did you have old 5x1/2's or did you manufacture from new?

Cheers Sean.

I was contemplating house burgalry..LOL! only kiddin...a friend of mine had just taken up a floor, so lots of 5 and 1/2 " to be had...

red sean · 14-09-2011 05:38PM

Good stuff! Blended in well so.

6 and 3/4" Pine Wood Flooring (tongue and groove)

Comments