Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.
Current status: https://keepboardsalive.com/
Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
If we do not hit our goal we will be forced to close the site.
Current status: https://keepboardsalive.com/
Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum
Private Group for paid up members of Boards.ie. Join the club.
Private Group for paid up members of Boards.ie. Join the club.
www.HobbyAirsoft.ie (dublin)
Comments
-
Stealthirl wrote: »Is it wrong that i realy want one with a diferant color recever,grip,handgard and stock but still with the purple bits
Yes. Very. Although, it would look funky. You're more than welcome to buy one for a 'project' :P
Darth Phoenix wrote: »Hey Guys,
Just wondering have ye any madbull barrells in stock with lengths of 230mm,300mm,363mm and 2x 455mm.
Also have ye any G&G hop up rubbers too..?
I may be making a trip up there soon.
You've caught us when we're low on barrels
We have 1x Madbull Black Python Version II 455mm left in stock. Now, we do have a selection of G&G 6.04 barrels (233mm x1, 357mm x2), 1x Deep Fire 6.02 363mm barrel, and JBU 6.01 barrels (407mm x2 and lots of 455mm)
G&G Black hop-up rubbers in stock as wellCool Breeze wrote: »hi guys,
do you have an ETA on the R93 Blasers?
The competition only fueled my need to own one!
Thank you.
The official word we're hearing is mid to late September. Although, if you cannot wait that long, then it may be worth heading to Oakridge to see our resident Sgt. Bob with his new found friend:
Thanks to StealthIRL for being our ace photographer 0 -
Stealthirl wrote: »Is it wrong that i realy want one with a diferant color recever,grip,handgard and stock but still with the purple bits
The purple bits are class0 -
-
None in at the moment, but we'll see if we can get them for youSpektorDyl wrote: »Hey guys, i sent you'se an email but got no reply. I wanted to know have you'se got any sig P229 threaded barrels? 0 -
-
Advertisement
-
-
Darth Phoenix wrote: »Hey Guys,
Just wondering have ye any madbull barrells in stock with lengths of 230mm,300mm,363mm and 2x 455mm.
Also have ye any G&G hop up rubbers too..?
I may be making a trip up there soon.
Was nice meeting you today. Sorry about the fractured conversation - was being pulled in every which way. Do let us know how you get on with the Punisher 1911's project 0 -
sorry to say it but inari my dragunov isnt working well at all.the power isnt great the range is terrible and the hop up doesnt do zilch and most of the time it fires 2 or 3 bbs any ideas as what i can do at home that may solve it? 0
-
The only things to check are:ghilliemaster wrote: »sorry to say it but inari my dragunov isnt working well at all.the power isnt great the range is terrible and the hop up doesnt do zilch and most of the time it fires 2 or 3 bbs any ideas as what i can do at home that may solve it?
- Hop up on/off
- Magazine not wound/too wound
- BBs
It's possible that there is a problem with the hop up rubber itself - we've not had any back ourselves, but I have heard it about the A&K ones. It'd be best if you could get it back to us.0 -
ghilliemaster wrote: »sorry to say it but inari my dragunov isnt working well at all.the power isnt great the range is terrible and the hop up doesnt do zilch
I know a lad with a Dragunov with most of the problems you have, and more. For the barrel lenght the range is awful. My pistol shoots farther 0 -
Advertisement
-
-
The only things to check are:
- Hop up on/off
- Magazine not wound/too wound
- BBs
It's possible that there is a problem with the hop up rubber itself - we've not had any back ourselves, but I have heard it about the A&K ones. It'd be best if you could get it back to us.
ah i use king arms bbs so there should be no problem there! if i turn the nut to the left it turns the hop off is it?? if i turn it to the right no bbs come out so i try not to go down that far im all the way down in cork tho so that could be a problem 0 -
The official word we're hearing is mid to late September. Although, if you cannot wait that long, then it may be worth heading to Oakridge to see our resident Sgt. Bob with his new found friend:
Thanks to StealthIRL for being our ace photographer
Who's the ugly dude holding the blaser? He looks familiar...
But seriously, thanks guys. It's a lovely piece of kit!!0 -
-
-
Out of stock but I'm puting an order in tomorrow so i'll put them on.garreth1995 wrote: »hi do you have 11.1 lipo instock:D
Should be in late next week0 -
-
Don't do anything mate.Pack it up, we'll arrange to get it collected and get a new one out to you.
I'll get Robbie to give it a good workout to make sure its ok before leaving
once again lads ya succeed in surpassing my expectations,this is why i get my guns off ye,ye are truly the nicest lads ive ever dealt with thats super lads do ye have my number so we can be in contact? 0 -
Was nice meeting you today. Sorry about the fractured conversation - was being pulled in every which way. Do let us know how you get on with the Punisher 1911's project
No worries at all mate, its good to be busy. It was nice to finally have met ya, Thanks again for laying out my options towards the project, i appretiate your help on it . Don't worry, I'll have a project diary made up and show ya the results once it's done.
Thanks again for your help mate, next time hopefully i'll be up with the van and T bear next.
DP0 -
That pick up has been organised - all you have to do is have it packed up and ready, and they'll swing by on Monday. There's no knowing what time, as it's whenever your address comes up on the driver's route. As soon as that's back with us, we'll send out a new one to youghillemaster wrote:once again lads ya succeed in surpassing my expectations,this is why i get my guns off ye,ye are truly the nicest lads ive ever dealt with thats super lads do ye have my number so we can be in contact? 0 -
Advertisement
-
-
Let us know if you've any trouble.Glad to hear it's okghilliemaster wrote: »!!!LADS!!! falce alarm the gun is grand all it needed was a good cleaning all i need is a stronger spring and im happy i hope ye havent sent any one out :O thanks again tho for being so under standable!!0 -
-
I think I saw Sig 552 mags on the last order ye posted? I f so when will I be able to order them on the site. Also Im having problems with my hop up. It used to be great and responsive but now its not great (not sure if it has anything to do with me not being able to use it in a few months?) It seems to effect the odd BB but most dip fairly early. Ill live with it i suppose but I was considering a tightbore. Do ye install them?
Thanks 0 -
I think I saw Sig 552 mags on the last order ye posted? I f so when will I be able to order them on the site. Also Im having problems with my hop up. It used to be great and responsive but now its not great (not sure if it has anything to do with me not being able to use it in a few months?) It seems to effect the odd BB but most dip fairly early. Ill live with it i suppose but I was considering a tightbore. Do ye install them?
Thanks
Sig mags are up on the site now - http://www.hobbyairsofter.com/Airsoft-Accessories/Magazines/Rifle-Mags/Sig-Sauer-552-551-550-mag
You can give Magic in the Kildare shop a shout if you're considering an upgrade (you can call him on 059 8623889 or you'll get him on the Hobby Airsoft Kildare thread)0 -
-
-
-
-
Advertisement
-
Advertisement