Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

Powerpoint dishwasher...adjusting legs

  • 24-08-2011 09:08AM
    #1
    bamboozle
    Registered Users, Registered Users 2 Posts: 3,699 ✭✭✭


    hi,
    this week i had a powerpoint dishwasher delivered (to replace a piece of sh1t Belling which broke down 5 times in 2 years) when trying to install it (its built in) i can adjust the front two legs easily as they screw, but the back two legs are giving me grief, the manual says

    'adjustment of back feet...insert the appliance and then adjust the height of the machine using the screws located at the bottom front. Use a screwdriver to turn the screws in a clockwise fashion to raise the dishwasher'

    there are 2 screws on the bottom front but they seem to be there to hold in the front panel of the dishwasher and neither of which turn clockwise as they are fully tightened clockwise.

    any wise people out there who can solve this for me?

    thanks!


Comments

  • #2
    wytch
    Registered Users, Registered Users 2 Posts: 151 ✭✭wytch


    There are two screws at the front bottom extreme right and left. they may have a hex head for a socket or possibly an allen key type, with allen key supplied with dishwasher. when you turn them the rear legs will come down. you need to turn them loads of times. take the weight off the back of the dishwasher by tilting it foward first. The mechanisms are rubbish. usually the left one turns in the opposite direction to the right one. this info i am giving is based on other dishwashers of this nature and more than likely your one. Have fun they are heartbreaking. then you will have even more fun attaching the door correctly. keep your reciept anything powerpoint i have ever seen has been complete rubbish. I wouldnt take one for free. Any more hassels fitting it I will do my best to help.


Advertisement
Advertisement