Zanussi Washing machine problem

Crann na Beatha · 16-07-2011 08:28PM #1

This post has been deleted.

knighted_1 · 16-07-2011 08:56PM

e30 is a family of error codes
you need to go into engineer diagnostics to find out if its e31 e32 e35 e38 or e3a
most are conected to pressure switch water side or failure to fil or drain in a given time period (blocked somewheremaybe)

is that a european model ?

Crann na Beatha · 16-07-2011 09:00PM

This post has been deleted.

knighted_1 · 16-07-2011 10:13PM

ok thats the chinese made zanussi -i will pull out the codes for that one in a few minutes (different to the normal zanussis )

knighted_1 · 16-07-2011 10:23PM

e30 -can not lock the door lock.fail to lock the door for 6 times when the pc board tries to lock the door after you press the start key.check the door hook and the door lock to get correct location .

thats what the service manual says ,cheap translation me thinks

basically the door interlock isnt engageing when you press start and if it is its not registering on the pc board .

check if door lock energises when you press start ,you should hear it click if it does .

Crann na Beatha · 16-07-2011 10:36PM

This post has been deleted.

knighted_1 · 16-07-2011 10:38PM

ok i will send the bill on at the end of the month

Zanussi Washing machine problem

Comments