Panasonic 42" Full HD 600hz 3D Plasma TV

WarZoneBrother wrote: »

Would this TV work well with PS3? And does it come with a set of glasses?.. If not what glasses do I need?

HD Console Gaming

Out of 10 consecutive runs, the Panasonic TX-P42G20’s input lag was measured to be on par with our resident Samsung F96 LED-based LCD television 4 times, and 16ms slower 6 times. [Game Mode] and [Intelligent Frame Creation] did not make any difference to the input lag figures.
Note: Our resident Samsung LE52F96BD with [Game Mode] engaged has about 30ms of latent input lag vs a CRT.
For us, reflex-dependent video games like Call Of Duty: Modern Warfare 2 played fluidly on the Panasonic TX-P42G20, which together with punchy contrast and vibrant colours amounted to a truly absorbing gaming experience. However, whether or not your gaming performance is going to be affected by this amount of input lag depends on your own individual sensitivity, and the reflexes demanded by the particular game.
We witnessed virtually no image retention on the Panasonic TX-P42G20 plasma television, but there’s no harm in taking the appropriate precautions and avoiding lengthy non-stop gaming sessions (at least for the first 200 hours) to prevent permanent screenburn.
On our review sample we did not notice any green/ yellow flashes (also known as phosphor trails, plasma rainbows, green fringe, phosphor lag, etc.) on fast-moving, high-contrast edges. However, because individual susceptibility (i.e. how sensitive your eyes are to the temporal fluctuations of plasma cells) plays a major part in determining whether you see these phosphor trails or not, you should trust your own viewing experience rather than what we say in this regard. If you have seen them before on other plasmas, it is very likely that you will see them too on the Panasonic TX-P42G20 given that the underlying plasma technology remains unchanged.

Plasma Screen Burn Prevention

By Vincent Teoh • Tuesday, 27 March 2007, 11:01 pm UTC

Now that we’ve reviewed a couple of plasma TVs back-to-back, it’s probably time to talk about one of the more frequently cited reasons for NOT embracing this display technology – plasma screen burn. First let’s clarify some terminologies:

• Image Retention: Temporary ghosting seen due to accumulation of plasma pixel charge after displaying high contrast (white) images for extended periods. The key is that it is transient and can usually be “washed away” by displaying other moving images or turning the plasma TV off overnight.
• Screen Burn: Also known as phosphor burn-in, this is permanent ghosting due to uneven phosphor aging. Let’s illustrate with an example… we know that to light up each plasma pixels, gas has to be electrically converted into plasma which then excites the phosphor coating. With each excitation the pixel will lose brightness… the current figure quoted is that a typical plasma TV will lose half its brightness after 60,000 hours of use (that’s 21 years if you watch TV 8 hours a day). Imagine a plasma panel where we continuously run the following image for an extended period, say 6 months:
  
  The pixels which form the phrase “Screen Burn” in white will excite their phosphors more and therefore lose their brightness faster than the black background. After 6 months, you can expect to see the phrase “Screen Burn” on almost any picture that is displayed on the plasma TV because the pixels there are going to be duller than the others, manifesting as screen burn. This is just a rough explanation; in real-life most screen burns are caused by static logos such as Sky, BBC, etc.
  To be honest, screen burn on plasma TV is becoming less and less of an issue today, as plasma manufacturers have developed new technologies to tackle the problem. Some pre-burn their plasma panels evenly in the factory before shipping them out to consumers. Some employ motion-adaptive technology to shift the pixels very subtly to the extent that we cannot detect any movement, yet it’s enough to prevent screen burn on plasma TVs. Most newer plasma TVs – certainly both the Panasonic TH42PX70 and Pioneer PDP4270XD – offer grey masking for 4:3 programmes… on the notion that any phosphor excitation in accordance to the moving image in the centre is better than no excitation at all.
  That said, it’s better to take precautionary steps during the first 200 hours of a plasma TV’s lifespan when the phosphors are still unstable and burn more intensely, making plasma screen burn a real risk. The most common (and correct) advice is to switch to Cinema mode, lower the brightness and contrast and use the plasma TV normally, taking care not to display static pictures or logos for more than 30 minutes. Also, try to use zoom modes to fill up the 16:9 plasma screen when watching 4:3 programmes or 2.85:1 DVDs… for the first 100 to 200 hours.
  However, if you wish to speed up the process, here’s a hardcore method (not for the faint-hearted, but particularly useful when the editorial deadline’s looming around the corner) step-by-step:
  1. Adjust the brightness and contrast correctly on your plasma TV. If you don’t have calibration material just set them to slightly below half of the maximum possible.
  2. Display a pure white image covering the whole of the plasma screen. Reference Materials, Title 14 (System Evaluation), Chapter 6 (100% Flat Field) in Digital Video Essentials works well, just make sure you don’t display the pause button too.
  3. Gradually increase the hours during the power-on/ power-off cycles (i.e. do this for 2 hours then switch the TV off for one hour; then 4 hours on, 2 hours off; then 5 hours on, 2 hours off; and so on and so forth). This way the phosphors can stabilise properly, and you can catch any potential problem before it becomes worse.
  4. 50 to 100 hours of power-on running-in will age the phosphors sufficiently to minimise the risk of plasma screen burn.
  The reason this method works is because you are burning the phosphors EVENLY by displaying the same intensity across the whole plasma screen. It is actually taught and endorsed by the Imaging Science Foundation (ISF), you can read about it in this AVSForum thread here.