What could have damaged one feed from a dual LNB?

FREETV · 2011-02-24 20:07:53

Hi guys, I have never had trouble before with LNBS or satellite equipment but earlier I tried the signal upstairs on one of my older Openbox F-300 sat receivers and now only one of the dual feeds from the LNB works, it now says no signal, it was nearly at 100 signal level earlier on the box, some of the stations worked,…

24-02-2011 09:07PM

#1

FREETV

Registered Users, Registered Users 2 Posts: 1,672 ✭✭✭

Join Date: October 2009

Posts: 1645

Hi guys, I have never had trouble before with LNBS or satellite equipment but earlier I tried the signal upstairs on one of my older Openbox F-300 sat receivers and now only one of the dual feeds from the LNB works, it now says no signal, it was nearly at 100 signal level earlier on the box, some of the stations worked, others said no signal, they they all were gone after five minutes or less. What blew one of the feeds while the other part of the Comag Lidl LNB still works as it always did? Was it a fault in the sat box or I fiddling with the installation settings?Thanks for any replies guys.

0

Comments

#2 24-02-2011 09:50PM

Vince Cable

Closed Accounts Posts: 272 ✭✭

Join Date: February 2011

Posts: 269

A bit of trial & error on your own part might be some help; try a different receiver for a start.

Edit-seen the other thread.

0