Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

making a SATA drice on PCI card a boot disk

  • 16-02-2011 01:34PM
    #1
    Airliner
    Registered Users, Registered Users 2 Posts: 35 ✭


    Hi

    upgrading a Compaq EVO D510 with a 20GB EIDE drive. Stuck in a new SATA drive and PCI SATA controller and cloned the disks.(disk is loose as there is only space for one disk internally) Windows XP see's the second disk fine when booting off the existing EIDE disk. So I know I have a god setup.

    My problem is selecting the SATA disk controller/disk as the bootable device in the BIOS. They are just not an option, it is the usual EIDE Disk/CD/Floppy & Network. I have updated the BIOS to the latest availble.(which is still old of course) Am I stuck here, is this machine just too old to know what SATA was?

    Any advice appreciated.

    ps. meant to say, BIOS can see the card in the PCI slot fine.

    Cheers


Comments

  • #2
    whizbang
    Registered Users, Registered Users 2 Posts: 2,076 ✭✭✭whizbang


    if your running XP, u need to run setup again with F6 option to load sata drivers.
    or you can boot to recovery console also and rescan for bootables (Bootcfg?). sorry cant remember just now.:o


Advertisement
Advertisement