Red valves in hot pres

sasser · 22-12-2010 12:26PM #1

Hi, was trying to find the filling loop for heating system. While doing this , I fiddled with all the valves in the hot press (must be about 6 of them). Now I'm not sure if I've done something wrong, and haven't got them in the right positions, anyone can throw light on what they are for and what position they should be in

Buford T Justice · 22-12-2010 01:15PM

sasser wrote: »

Hi, was trying to find the filling loop for heating system. While doing this , I fiddled with all the valves in the hot press (must be about 6 of them). Now I'm not sure if I've done something wrong, and haven't got them in the right positions, anyone can throw light on what they are for and what position they should be in

Firstly, whats the problem with the system since you were fiddling with the valves?

You will need to post a pic of you're hot press and describe which valves you were fiddling with.

sasser · 22-12-2010 06:56PM

haven't a camera, will try on phone and see if it's any good. Was trying to top up heating system, pressure a little low but nothing major. Have figured out what 2 of the values are for by process of elimination - one is hot feed to taps and one is cold feed to taps.

Keith186 · 22-12-2010 07:00PM

One will be for hot water coil in, another for hot water coil out I'd imaggine.
Google the model if you know it, you can usually find a manual.

bbam · 22-12-2010 10:28PM

it's a common problem !!!

+

=

Red valves in hot pres

Comments