Decoding a Region DVD Player

To use this hack you will need a one for all URC - 7555 (€13.45 Power city)

First set up remote to control player:

1. Press DVD device button on remote
2. Press and hold Magic button and wait for double blink
3. Enter device code 0533

Now we need to program Macro Buttons A-E with the following codes, read below for instructions:

A - 189
B - 255
C - 095
D - 221
E - 079

This is how you program those numbers into the Marco Buttons:

1. Press and hold Magic button until double blink
2. Press 994.
3. Briefly press Magic button (don't hold).
4. Enter 3 digit code from list above.
5. Press appropriate Colour button to store it.
6. Repeat steps 1 to 5 until all 5 Macro Buttons programmed.

Re-program the player:
1. Remove any disk in player, put player on standby.
2. Press Macro Buttons A,B,C,D,E in sequence - SUCCESS is displayed on DVD player and player starts up.
3. Press Macro Buttons A,B,C,D,E in sequence again - player shuts down (and may restart again) and you're done!