Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

multi-lnb bracket to fit Hirschmann 1m dish?

  • 01-08-2010 03:34PM
    #1
    Noreen1
    Closed Accounts Posts: 1,654 ✭✭✭


    Does anyone know where I can obtain a multi-LNB bracket for a Hirschmann 1M satellite dish?

    I spent ages putting the dish up yesterday, only to find that the existing LNB bracket is riveted in place, and the rivets have worked loose, for some reason. (The dish has been lying in my shed for a couple of years.)
    The end result is a signal that varies between 87% strength, 78% quality - and no signal lock at the least gust of wind.:mad: Dish elevation is set at 22.5 degrees, the wall mount worked perfectly on my old dish - so that leaves the LNB bracket suspect!!

    Standard multi-LNB brackets do not seem to fit, because the feed arm is very wide, at about 48mm - hence leaving too much "wriggle room" for an LNB bracket that fits a Triax dish, for example - even if I bolt it in place!

    Any advice would be appreciated - I've searched online for an LNB bracket for a Hirschmann dish - either single or multi-lnb - without success.

    Noreen


Comments

Advertisement
Advertisement