RF Out - Picture but no sound

BraveDonut · 2010-02-21 11:04:40

Moved my TV to the other side of the room away from the point where the coax from the dish comes through the wall. I have picture & sound using a digi-sender, but the quality is mixed at best. I enabled the RF out and ran coax from the decoder to the TV. Perfect picture but no sound! Any ideas?

21-02-2010 12:04PM

#1

BraveDonut

Registered Users, Registered Users 2 Posts: 1,224 ✭✭✭

Join Date: December 2004

Posts: 1051

Moved my TV to the other side of the room away from the point where the coax from the dish comes through the wall.
I have picture & sound using a digi-sender, but the quality is mixed at best.
I enabled the RF out and ran coax from the decoder to the TV.
Perfect picture but no sound!
Any ideas?

0

Comments

#2 21-02-2010 12:46PM

encryptix

Registered Users, Registered Users 2 Posts: 233 ✭✭

Join Date: March 2008

Posts: 200

i could be way off, but i had this problem with a dvd recorder. It turns out that the sound was set to the wrong type. (maybe your settings could of changed/reset)
Here's the thread for it.

http://www.boards.ie/vbulletin/showthread.php?t=2055707082

0
#3 21-02-2010 02:00PM

kbell

Registered Users, Registered Users 2 Posts: 1,248 ✭✭✭

Join Date: June 2006

Posts: 1137

Aye, go to manual tuning on your television and change the sound settings to "I", that should sort it.

0
#4 21-02-2010 02:19PM

BraveDonut

Registered Users, Registered Users 2 Posts: 1,224 ✭✭✭

Join Date: December 2004

Posts: 1051

Thats it! Perfect, thanks

0