Cavity wall insulation aeroboard for a garage

bushykangaroo · 2010-01-28 23:46:09

Can anyone give me a rough cost of this type of insulation for use within a cavity wall of 300mm construction, thats 2 leafs of 4inch blocks on edge giving 200mm and the 100mm cavity which will break into 60mm insulation / 40mm air gap im planning. Is there any cheap fome of aeroboard that would do for a garage or will i…

29-01-2010 12:46AM

#1

bushykangaroo

Closed Accounts Posts: 90 ✭✭

Join Date: March 2009

Posts: 61

Can anyone give me a rough cost of this type of insulation for use within a cavity wall of 300mm construction, thats 2 leafs of 4inch blocks on edge giving 200mm and the 100mm cavity which will break into 60mm insulation / 40mm air gap im planning.

Is there any cheap fome of aeroboard that would do for a garage or will i just run with the same type used in house construction.

Whats the general price and area covered?

0

Comments

#2 29-01-2010 01:02AM

muffler

Registered Users, Registered Users 2 Posts: 47,486 ✭✭✭✭

Join Date: August 2002

Posts: 41618

Have a look here. Might help a little.

0
#3 09-02-2010 04:45PM

Donnchadh

Registered Users, Registered Users 2 Posts: 33 ✭

Join Date: May 2006

Posts: 26

I'm in a similar situation. I have a block built shed in my garden and I'm thinking of turining it into a workshop, but at the moment it's way to cold for that. What insulation would you recommend? The shed is roughly 24' by 10', single cavity block with a flat roof, zero insulation. The DPC appears to be on block above floor level (I could be wrong here but that is what it looks like)

0