Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

Washer Dryer won't stop on wash cycles

  • 14-09-2009 12:51AM
    #1
    Closed Accounts Posts: 13,420 ✭✭✭✭


    Have a Hotpoint Washer Dryer (WDD40G) - not by choice! - and as of today it just doesn't want to stop on a wash cycle. Have tried 3 different ones (normally 30, 45 and 65 mins) and all still running after 2 hours. Only way to sort it is empty the drum and then select rinse and spin.

    It's still under guarantee but I'm just back from hols and can't afford the time off if I don't have to take it.

    Any ideas? Manual says select a different programme :confused:


Comments

  • Closed Accounts Posts: 870 ✭✭✭knighted_1


    sounds like the heating element is bust -not advancing thru the programme -machine will continue to wash until water reaches desired temp and then thermo stat clicks over to next part of cycle ,not happening so i would check element first


  • Banned (with Prison Access) Posts: 8,483 ✭✭✭miju


    few different but obviousl things. check the fill hoses aren't kinked at the back as this will cause a really slow fill. Also disconnect the fill hose and make sure the filter where the hose attaches to isnt clogged with any deposits.

    after that theres a few other things too.


  • Closed Accounts Posts: 870 ✭✭✭knighted_1


    miju wrote: »
    few different but obviousl things. check the fill hoses aren't kinked at the back as this will cause a really slow fill. Also disconnect the fill hose and make sure the filter where the hose attaches to isnt clogged with any deposits.


    machine is washing constant so must be getting water ,can rinse and spin so is getting water


  • Closed Accounts Posts: 13,420 ✭✭✭✭athtrasna


    it's happenning again. Can't say if it's the same machine or a new one, had a really bad run on appliances and have replaced them all, can't remember when. Any ideas?


Advertisement
Advertisement