how to install a double aerial coaxial socket wall face plate TV outlet

siireland · 2009-06-03 18:24:10

hi, my ntl connection into the wall is really bad and i have to move the lead going into it all the time to get a clear picture. i wanted to replace the socket to see if this will help as i already tried buying a new lead. i'm not sure how to install the socket though and can't find any easy instructions on the internet.…

03-06-2009 07:24PM

#1

siireland

Closed Accounts Posts: 2 ✭

Join Date: June 2009

Posts: 1

hi, my ntl connection into the wall is really bad and i have to move the lead going into it all the time to get a clear picture. i wanted to replace the socket to see if this will help as i already tried buying a new lead. i'm not sure how to install the socket though and can't find any easy instructions on the internet. does anyone have advice? thanks!

0

Comments

#2 03-06-2009 07:31PM

homer911

Registered Users, Registered Users 2 Posts: 5,070 ✭✭✭

Join Date: September 2007

Posts: 4685

remove the faceplate to the socket and you will see how the existing co-axial cable is connected, simply disconnect it and connect it to the new faceplate in the same way. Just make sure you keep the outer wires on the co-ax clear of the inner thicker wire.

0
#3 03-06-2009 07:41PM

siireland

Closed Accounts Posts: 2 ✭

Join Date: June 2009

Posts: 1

thanks. that sounds easy enough. i was just afraid to try in case it was more complicated.

0