Best way to Drain/break a watercooling system

Cassiel · 2008-04-17 14:15:25

Hi lads, I have an external watercooling unit with the two hoses going into the PC. I want to add two graphics cards to the loop. What is the best way to not get liquid all over the components when I disconnect the hose from a mainboard block? Done a google and couldn't find a how-to guide so if there is any links for same…

17-04-2008 03:15PM

#1

Cassiel

Closed Accounts Posts: 327 ✭✭

Join Date: June 2004

Posts: 271

Hi lads,

I have an external watercooling unit with the two hoses going into the PC. I want to add two graphics cards to the loop. What is the best way to not get liquid all over the components when I disconnect the hose from a mainboard block? Done a google and couldn't find a how-to guide so if there is any links for same I would appreciate it. Ta.

0

Comments

#2 17-04-2008 11:22PM

requiem1

Registered Users, Registered Users 2 Posts: 611 ✭✭✭

Join Date: November 2005

Posts: 518

what external system do you have? is a zalman? why not just drain the system at the part of the water cooling that is outside the pc or else just remove the block from the motherboard and take the components out. That or if you have a room just remove the clock from the board, drop the block into a bowl and then take off the tubing and let it drain

0