Help on NTL Digital Cable receiver

kmhg72 · 28-05-2007 05:09PM #1

Hi everybody,

I got Digital cable service with NTL, and it has been working fine. I have a Pace DC221KN receiver. Today, I was playing with the TV settings in the receiver, and I made a mistake. There is one setting that sets the SCART connection off, and redirects it to the RGB connection on the TV. Immediately after I wrongly changed the SCART setting, the image went off.

After this, I changed to the RGB channel on my TV. My TV is very old, and the RGB channel doesn't show any image, but I can still hear the sound of TV channels. I guess everything is working fine, because if I switch channels, or change the volume, I can hear that it is working.

The help I'm looking for is if any of you could tell me the sequence of keys I need to press in my receiver's remote control to get to that menu (I remember how to change the setting). As I cannot see anything, I need a blind guide, like "press menu, down 3 times, press OK", and so on.

Any help will be appreciated.

Cheers,

Karim
----
http://www.flickr.com/photos/kheredia/

Alun · 28-05-2007 05:13PM

menu 5 3 down-arrow left-arrow to switch from RGB to composite, if that's what you mean?

Or menu 5 3 3xdown-arrow right-arrow to turn SCART AV control from off to on.

subway · 28-05-2007 05:15PM

menu
number 5
number 3
down once
left once

kmhg72 · 28-05-2007 05:20PM

Thanks for such fast response! It worked perfectly. :-)

Karim

http://www.flickr.com/photos/kheredia/

Alun · 28-05-2007 05:32PM

No problem ... this same problem has cropped up a couple of times before on here.

Help on NTL Digital Cable receiver

Comments