How much to pay for a weber 32/36?

AsphaltRisin' · 14-05-2007 12:19PM #1

How much should i be looking to pay for a used one of these and a used pinto inlet manifold?

Not my usual field of expertise so an help appreciated

ds20prefecture · 14-05-2007 12:57PM

I gave €100 for a working steering rack and a perfect Weber DLE.

The problem is you won't know how good the carb is until you fit it to your inlet manifold - a rebuild kit will cost you anything about €50 , but that won't fix a warped carb base. You can have it skimmed, but that just weakens the base and means it'll warp quicker.

If it comes from a car that you know runs well, then i'd say about €100. If it's pot luck then about €30.

AsphaltRisin' · 14-05-2007 01:02PM

ds20prefecture wrote:

I gave €100 for a working steering rack and a perfect Weber DLE.

The problem is you won't know how good the carb is until you fit it to your inlet manifold - a rebuild kit will cost you anything about €50 , but that won't fix a warped carb base. You can have it skimmed, but that just weakens the base and means it'll warp quicker.

If it comes from a car that you know runs well, then i'd say about €100. If it's pot luck then about €30.

Yeah was thinkin around 100 for it. Thanks.
I know it worked when it was on the other car so should be grand, and definately better than the useless carb that's on my yoke now, horrible old ford econo0my one

How much to pay for a weber 32/36?

Comments