Wood Pellet Boiler Dimensions?

De_man · 05-10-2006 10:04PM #1

hi

i intend to put 4" block partition walls in the garage (9.5m X 4.5m)
just wondering what area would be suitable for the gerkos wood pellet
boiler with a large hopper, i was reckoning (2.5 X 4.5),

any suggestions greatly appreciated

thanks

de_man

a pint of plain is yer only man

05-10-2006 10:51PM

this manual http://www.gerkros.ie/gerkros pdf manuals/woodpecker_Inst_Manual.pdf would be a good starting point

Builderwoman! · 06-10-2006 11:20AM

Dimensions are on their website. Make sure you allow enough space around it etc. Check out their site.

De_man · 06-10-2006 06:53PM

thanks for the info, i had checked out the site, i was just wondering
if anyone else had installed such a system, i reckon i'll be okay with
2.5 X 4.5 that'll allow a larger hopper to be installed

thanks again

06-10-2006 09:34PM

yep, thats about the area i'm thinking of allowing for mine when I get around to building the garage/boilerhouse

ircoha · 06-10-2006 11:32PM

I would put up a stud partition until the boiler etc arrived, u need plenty room for assembly, so build the wall afterwrds

De_man · 07-10-2006 01:17AM

that's a great idea, with regard to the stud partition, tks

unfortunately i need to put the partition wall on the floor slab (8")
which has plenty of A393 and 12mm rebar throughout, so i'll need to
tie the wall to the external walls incase it decides to move:eek:

i wouldn't feel safe with the wall not be tied to the adjacent walls

as it's going to be a couple of more months before the house is finished
i'll leave a section open and i can always finish it off some time after
the boiler is installed:D

Thanks again

Wood Pellet Boiler Dimensions?

Comments