how to take the cover off a 6310i

eurotrotter · 08-02-2006 12:33PM #1

howe is it i thought its eaily removed but i thought wrong any ideas lads?
thanks very much in advance!

Debbio69 · 08-02-2006 02:01PM

place 1 thumb at the bottom (where flat silver part is) push down then up towards the top,
your other thumb should be up the top, pushing up too

dont use a pen or screw driver, cause you could be charged for a new one

jrey1981 · 08-02-2006 06:13PM

That is not correct Debbio69, you need a T6 Torx screwdriver to undo the screws after removing the battery.

worzel · 08-02-2006 06:43PM

jrey1981 wrote:

That is not correct Debbio69, you need a T6 Torx screwdriver to undo the screws after removing the battery.

thats true jrey,its not as easy as that debbi,i have a 6310i for sale and will pm you and let you know how to remove the cover,ive done it before and it can be tricky
Best of luck with it;)

Ruu_Old · 08-02-2006 09:20PM

Its difficult to remove the cover, as said you will need a T6 screwdriver to remove all of the screws. Even then you will have to be ever so careful not to break it. I had to pry it open after all the screws were removed, but again be very careful as its sealed very tight at the top part (near the infra-red cover)

Debbio69 · 09-02-2006 12:36PM

apologies, the line read ''how to take off the cover''
he didnt specify which cover thats why i thought it was the battery door

how to take the cover off a 6310i

Comments