Clearance - parts and replicas

I have a bunch of old airsoft replicas and parts, 8+ years old at this stage. If someone is willing to take it all I'm willing to lower the price.

It's all stored at the family home, so please allow for a delay in posting/collection. Can do collection in Wicklow area on a weekend.


Assortment of parts - 70 euro.

Stocks, grips, rails, barrels, gearboxes, hop ups, flashlight. Predominantly M4/AR15 type AEG parts. A&K SVD parts in the first photo are not included.

A&K SVD (sping) - 165 euro

Has an upgraded hop up chamber that allows flat-hopping. Comes with an uninstalled upgraded piston and chamber upgrade for better FPS consistency. Also comes with assortment of spring with different ratings to tune the power within legal limits.

Comes with a real Bushnell scope with QD mount intended for rimfire, so very sturdy and accurate for airsoft and probably worth as much as the replica. Rails are mounted to top cover but needs to be epoxied in place. Zero retention is still acceptable for airsoft.

Unsure of FPS of installed spring so it will be shipped with no spring installed. Shoots flat, but to the right, so hop up or external barrel positioning needs adjusting.

DE tri-shot - 20 euro

Lost all the shells for it. Still works last I tested it. Will confirm by putting in BBs manually before posting.

M4 AEG - 130 euro

A mix of parts, couldn't say with certainty as it was built a long time ago. Polymer upper and lower receivers, metal handguard, suppressor, barrel and buffer tube.

Vison King 1-4x, Theta Aimpoint clone on canted m-lok mount. Both need batteries but work. Suppressor has foam in it for noise suppression. Metal angled grip. Comes with 6 midcaps and a speed loader.

Internals are largely G&G. Has a basic Gate mosfet. Selector switch is a bit iffy, can go full auto on semi setting sometimes. Dean connector for lithium batteries. Stock is stuck in place, can't be adjusted. Stock cover pin is missing so doesn't pivot but does stay in place. Buffer tube was modified to make room for the mosfet and battery. Would make a good parts or project gun.

Gun bag - 20 euro