Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

Water getting inside my window

  • 26-03-2026 01:15PM
    #1
    Registered Users, Registered Users 2 Posts: 5


    Hello … has anybody had a similar problem to mine here?

    I would just love to know how to fix this!

    I have dampness getting in along the inner edge of a window as shown in the pics

    Its the only place that water is getting in. The house is 26 years old and must be happening since day one!

    If there is strong wind driving rain towards that window, you can see water running down along the inside of the window

    There is obviously water leaking in through the cavity. There is no obvious gap in the stone outside (i have checked).

    Im tempted to get the local window supplier guy to remove the window to check out that cavity

    Wonder if the window could be installed incorrectly?? Any ideas would be appreciated

    Id love to solve it!!

     



Comments

  • Registered Users, Registered Users 2 Posts: 47,486 ✭✭✭✭muffler


    That doesn't look good at all. Most likely it's a problem with the dpc but the only way to be sure is to remove the window.



  • Registered Users, Registered Users 2 Posts: 5 Craggy Man


    Thanks for your reply, thats interesting you mentioned DPC. Im getting a local window installer to look at it next week. If the window was removed, would it then be very obvious to see if the DPC is the issue?



  • Registered Users, Registered Users 2, Paid Member Posts: 10,141 ✭✭✭✭10-10-20


    Given the position of the moisture at the top of the reveal, I'd be thinking that it's the DPC on the lintel specifically.

    It's not usually possible to see the lintel DPC unless the external stone face is removed, but it's not that unusual to have to rework it by pulling the bricks/blocks/stone, but your would be challenging given the lay of the blocks.

    https://www.housebuild.com/documents/1528/lintels



  • Registered Users, Registered Users 2 Posts: 47,486 ✭✭✭✭muffler


    If the issue is at the top of the vertical dpc then it's a little easier mended but as 10-10-20 said above it could well be (and probably is) the dpc at lintel level then it's a bit trickier. You could apply some sealer around the window edge but you would be masking the main problem which will reappear at a later date. Get the window out and see where the problem lies.



  • Registered Users, Registered Users 2 Posts: 4,575 ✭✭✭tabby aspreme


    Take a close look at the mortar joints over the window and the stone, for cracks, looks like limestone which is porus, I've seen a chimney built with limestone which had to be plastered to stop it leaking



  • Advertisement
Advertisement
Advertisement