Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.

Fitting Insulated Slabs

  • 13-08-2025 02:15PM
    #1
    maxpet
    Registered Users, Registered Users 2 Posts: 50 ✭✭


    Slabbing one of the bedrooms in my house. Looking for advice to see if I am on the right track.

    Fitting a 50mm Insulated slab on 2 walls (Block) and a ceiling.

    To slab the ceiling was going to use 4.2 x 75mm Plasterboard screws. Was going to fit a screw every 8” . But start at 2” inch in

    from the sides/top/bottom of plasterboard to start.

    On the wall was going to use M8 x 90 mushroom fitting one every foot and starting about 4” Inches in on from the sides.

    Does that sound Ok or am I missing anything??



Comments

Advertisement